Adding a printer
A generic universal print driver is installed on the computer to support
For additional information, review the “Printing and Imaging Support on HP Thin Clients” white paper on the HP Web site at http://welcome.hp.com/country/us/en/support.html.
CAUTION: If the available free space on the flash drive is reduced to less than 3 MB, the computer becomes unstable.
NOTE: Downloading and using printers requires significant flash capacity. In some cases, you may have to remove software components to free up space for printers.
Printing to a locally connected printer from an ICA or RDP session using the print drivers of the server produces full text and graphics functionality from the printer. To do this type of printing, you must install the print driver on the server and the
Adding printers using a text-only print driver
To install a printer using a generic
1.Connect the printer.
2.Select Start > Printers and Faxes.
3.Click Add a printer.
The Add Printer Wizard opens.
4.Click Next.
5.Click Local printer configured to this computer.
6.Be sure that the Automatically Detect and Install my Plug and Play Printer check box is not selected.
7.Click Next.
8.Click Use the Following Port.
9.Select the appropriate port from the list, and then click Next.
10.Select the manufacturer and model of the printer, and then click Next.
11.Use the assigned default name or other name for the printer, and then click Next.
12.Select Do Not Share this Printer, and then click Next.
13.Choose whether to print a test page, and then click Next.
14.Click Finish.
Adding a printer 75