HP 2533t Mobile manual Using SD Card Reader cards, Inserting a digital card

Page 83

Using SD Card Reader cards

Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers.

The SD Card Reader supports the following digital card formats:

●MultiMediaCard (MMC)

●Secure Digital (SD) Memory Card

You can view or change the status of the SD Card Reader through Computer Setup (f10).

To change the status of the SD Card Reader, follow these steps:

1.Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

2.Use the arrow keys to select System Configuration > Port Options, and then press enter.

3.Use the arrow keys to select Enable or Disable in the Flash Media Reader box.

4.To save your changes and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the on-screen instructions.

Your changes go into effect when the computer restarts.

Inserting a digital card

CAUTION: To avoid damaging the digital card or the computer, do not insert any type of adapter into the SD Card Reader.

CAUTION: To prevent damage to the digital card connectors, use minimal force to insert a digital card.

1.Hold the digital card label-side up, with the connectors facing the computer.

2.Insert the card into the SD Card Reader, and then push in on the card until it is firmly seated.

Using SD Card Reader cards 73

Image 83

Contents HP 2533t Mobile Thin Client First Edition May Document Part Number Safety warning notice Iv Safety warning notice Table of contents Keyboard Multimedia Memory modules Appendix a Routine care Page Pointing devices Identifying the hardwareTop components Component Description LightsOff If the computer is plugged into an external Buttons and switchesKeys Adjust Power PropertiesFn key DisplayFront components Right-side components Left-side components Components Description Rear componentsBottom components Wireless antennae Identifying the labels Enhanced Write Filter Using the Enhanced Write Filter command line control Using the Enhanced Write Filter user interface Using the Enhanced Write Filter status utility Drive C ConfigurationLocal drives Drive ZRoaming profiles Click Reconnect at LoginSaving files Mapping network drivesCreating user profiles User accountsCreating a new user account Page Remote Desktop Connection ApplicationsCitrix Program Neighborhood TeemNT Terminal Emulation HP PC Session Allocation Manager SAM ClientAltiris Client Agent HP Dhcp Settings Update Client Select Start Control Panel HP ThinState Capture HP ThinState CaptureHP ThinState Deploy Windows Media Player Macromedia Flash Player Microsoft Internet ExplorerKeyboard Using pointing devicesDisplaying system information fn+esc Using hotkeysDecreasing screen brightness fn+f9 Switching the screen image fn+f4Viewing battery charge information fn+f8 Initiating Standby fn+f3Using the HP Quick Launch Buttons Displaying the Q Menu Accessing the Quick Launch Buttons control panelEnabling and disabling the embedded numeric keypad Using the keypadsUsing the embedded numeric keypad Switching key functions on the embedded numeric keypad Using an optional external numeric keypadPower control and light locations PowerSelect Start Turn Off Computer Turn Off Shutting down the computerInitiating and exiting Standby Setting power optionsUsing power-saving states Click the Notification Area tab Using battery powerUsing the battery meter Setting password protection upon exiting StandbyInserting or removing the battery Displaying the remaining battery chargePage Identifying low battery levels Charging a batteryManaging low battery levels Resolving a low battery level Conserving battery powerStoring a battery Disposing of a used battery Connecting the AC adapter Using external AC powerPlug the other end of the power cord into an AC outlet Power Multimedia Using multimedia hardwareUsing the audio features Using the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresPreventing playback disruptions Using multimedia softwareOpening preinstalled multimedia software Using multimedia softwareSelect Start My Computer Changing DVD region settingsObserving the copyright warning Using Wlan WirelessAbout integrated wireless devices Using wireless controlsSetting up a Wlan Select Start HP System Information Connecting to a WlanUsing wireless security features Identifying a Wlan deviceModem and LAN Using a modemConnecting a modem cable Connecting a country-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Set the modem to ignore dial tones Solving travel connection problemsCheck the telephone line type Check for pulse or tone dialingClear the check box for Wait for dial tone before dialing Connecting to a local area networkProtecting the computer SecurityAutomatic logon Using passwordsSetting passwords in Windows Using administrator and user passwordsManual logon Setting passwords in Computer SetupUsing a setup password Administrator logonEntering a setup password Using a power-on passwordManaging a setup password Requiring a power-on password at restart Managing a power-on passwordEntering a power-on password Configuring Microsoft Windows Firewall Using Microsoft Windows FirewallAdding exceptions Gathering configuration informationTroubleshooting applications Identifying failure symptomsClick Add Port Adding a programAdding a port Installing a security cable Connecting a USB device Hardware upgradesUsing a USB device Securing USB ports Using the expansion port Using the USB Storage Options utility Removing a USB deviceInserting and removing a PC Card Using PC CardsPage Inserting a digital card Using SD Card Reader cardsRemoving a digital card Click Use the Following Port Adding printers using a text-only print driverAdding a printer Select Start Printers and Faxes Click Add a printerUsing manufacturer print drivers Handling drives Identifying installed drivesDrives Inserting an optical disc CD or DVD Using optical drives select models onlyRemoving an optical disc CD or DVD When the disc tray opensWhen the disc tray does not open Page Using an optional external MultiBay or external MultiBay Using external drivesUsing optional external devices Memory modules Page Page Page About the boot order device MultibootEnabling boot devices in Computer Setup Considering boot order changes Choosing a boot device using the F9 prompt Choosing Multiboot preferencesSetting a new boot order in Computer Setup Starting Computer Setup Computer SetupNavigating and selecting in Computer Setup Using Computer SetupRestoring factory settings in Computer Setup Security menu Computer Setup menusDiagnostics menu File menuSystem Configuration menu Traveling and shipping Cleaning the displayCleaning the keyboard Routine carePage USB IndexJacks USB

Related manuals

Manual 112 pages 56.46 Kb

Manual 116 pages 42.21 Kb

Manual 3 pages 25.35 Kb

Manual 80 pages 44.65 Kb

Manual 18 pages 18.88 Kb