HP Smart Array (RAID) Host Bus Adapters manual Help

Verifying the firmware update

1.After updating the firmware, cycle the power on the system and on any external JBODS connected to the system.

2.Use saupdate LIST to confirm that the correct firmware version is installed. See “Verifying the controller firmware” (page 14).

For example:

fs0:\EFI\TOOLS> saupdate list

********************************************************************************

Smart Array Offline Firmware Update Utility

Version 2.09.10.02

(C)Copyright 2009 Hewlett-Packard Development Company, L.P.

********************************************************************************

Seg	Bus	Dev	Func	Description		Version	Build
1	55	0	0	HP Smart Array	P812	3.26	0
	External Enclosures Connected :
	Index		Description		Version
	2		MDS600		2.62
	3		MDS600		2.62
	4		P812 INT EXP		3.02
1	71	0	0	HP Smart Array	P411	3.26	0
	External Enclosures Connected :
	Index		Description		Version
	0		MSA60		2.18
	1		MSA70		2.18
	2		MSA60		2.18
	3		MSA70		2.18
1	C7	0	0	HP Smart Array	P812	3.26	0
	External Enclosures Connected :
	Index		Description		Version
	2		D2700	SAS AJ941A		0052
	3		D2600	SAS AJ940A		0052
	4		P812 INT EXP		3.02
1	E4	0	0	HP Smart Array	P411	3.26	0
	External Enclosures Connected :
	Index		Description		Version
	0		MDS600		2.62

HELP

To display usage text, program version number, and build date, enter saupdate without any arguments.

fs1:\> saupdate

********************************************************************************

Smart Array Offline Firmware Update Utility

Version 2.09.10.02

(C)Copyright 2009 Hewlett-Packard Development Company, L.P.

********************************************************************************

Usage: saupdate LIST

For Controller Flash:

24 Installing, verifying, and configuring the controller