HP 2108, 2115 manual Load paper

Page 13

hp psc 2100 series

2Tap the stack on a flat surface to align the edges of the paper, and then check the paper for the following:

Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

Make sure all the paper in the stack is the same size and type, unless you are working with photo paper.

3Insert paper into the paper tray print-side down until it stops. If you are using letterhead, insert the top of the page first.

Be careful not to use too much or too little paper. Check that the stack of paper contains several sheets but is no higher than the top of the paper-length guide.

4Slide the paper-width and paper-length guides in until they stop at the edges of the paper. Make sure that the paper stack lies flat in the paper tray and fits under the tab of the paper-length guide.

5Replace the output tray.

load paper

9

Image 13
Contents Hp psc 2100 series All-in-one Copyright Hewlett-Packard Company Safety informationContents Index Setup menu optionsHelp Description Get helpReadme file Windows only Options and settings within the dialog boxFile, do the following Series, and then choose View the Readme FileFeature Front panel featuresQuick start Review the hp photo & imaging director Use your hp psc with a computerStart Copy Color use to start a color copy Use your hp psc with a computer Director for macintosh Load originals Load originals Load paperClose the lid Load paperLoad paper Load envelopes Load photo paper Load postcards or hagaki cardsPaper Tips Tips for loading other types of paper in the paper traySet the paper type Press Enter to choose the displayed paper type Set the paper sizeMake copies Use the copy featuresMake a copy Load your original on the glassUse the copy features Change settings for all copy tasks Copy a photo Perform special copy jobsFit a copy to Print several copies on one Make a poster Prepare a color t-shirt transfer Stop copying To stop copying, press Cancel on the front panelCopy options Hp psc 2100 series Scan an original Use the scan featuresYou can start a scan from your computer or from your HP PSC Scan to a different software program Stop scanningClean the lid backing Clean the glassMaintain your hp psc Work with print cartridges Clean the exteriorPrint a self-test report Handle print cartridges Latches Work with print cartridges Hp psc 2100 series Clean the print cartridges Restore factory defaultsSet the prompt delay time Set the power save timeSet scroll speed Following options are available from the Setup button Setup menu optionsMaintenance or Print Report options Hp psc 2100 series Maintain your hp psc Possible installation problems Additional setup InformationAdditional setup information Set the front-panel view angle Set the language and regionConnect your usb port Connect your hp psc to your computerWhat works What does not work Connect your hp psc to more than one computerRemove and reinstall your hp psc software Hp psc 2100 series System requirements Technical informationPaper-tray capacities Paper specificationsPaper sizes Print margin specifications Print specificationsTop Bottom Left Right Leading edge Trailing edgea Copy specificationsPhysical specifications Scan specificationsPower specifications Environmental specificationsRegulatory notices Environmental product stewardship programDoc statement / déclaration de conformité Canada According to ISO/IEC Guide 22 and EN Declaration of conformityGet support and other information from the internet Get hp psc SupportHp customer support Prepare your unit for shipment Call in the U.S. during warrantyHp distribution center Hp psc 2100 series Warranty service Warranty informationWarranty upgrades Returning your hp psc 2100 series for serviceHewlett-packard limited global warranty statement Hewlett-packard limited global warranty statement Hp psc 2100 series Numerics IndexPage Page Hp psc 2100 series Service Upgrades Statement Index Order media Order suppliesOrder print CartridgesC8644-90213 Visit the hp psc information center
Related manuals
Manual 1 pages 56.34 Kb