
hp psc 2100 series
You may also want to refer to the readme file for more information on possible installation problems. On Windows, you can access the readme file from the Start button on the taskbar; select Programs, 
set the language and region
Usually, the language and region are set when you install the HP PSC. If you set the region or language incorrectly during installation, use the following procedure.
1If you are unable to read the  .
 .
2Press Setup until Maintenance appears, and then press Enter.
3 Press  until Lang/Region appears, and then press Enter.
 until Lang/Region appears, and then press Enter.
4Press  until the desired language appears.
 until the desired language appears.
5Press Enter when the desired language appears.
6After the language is selected, you are prompted with all the regions for that selected language.
7Press  until the desired region appears.
 until the desired region appears.
8Press Enter to select the desired region.
You can confirm the region and language by printing a 
9Press Setup until Print Report appears, then press Enter.
10 Press  until
 until 
set the front-panel  view angle
If you have difficulty seeing the text in the 
1Press Setup until Maintenance appears, and then press Enter.
2 Press  until View Angle appears, and then press Enter.
 until View Angle appears, and then press Enter.
3 Press  until the desired angle appears, then press Enter.
 until the desired angle appears, then press Enter.
| set the language and region | 35 |