Chimney Connection

6 288 25	30	30		PARTSREPAIR WOODAUTOMATICBURNING -2941MODELINTERIOR
6 288 25	31	31 7	9	PARTSREPAIR WOODAUTOMATICBURNING -2941MODELINTERIOR
2
				5

Two basic types of chimneys are ap- proved for use with solid fuel: Factory- built and masonry. Factory-built chimney must comply with UL103HT standard.

Do not expect your stove or furnace to create draft. Draft is not a function of the appliance. Draft is purely a function of the chimney. Modern stoves and furnaces are much more air-tight and efficient than those of the past and, therefore require greater draft. A minimum of .05, measured in water column (gauges to measure chimney draft are readily available at stove shops and are economical to purchase or rent) is required for proper drafting to prevent back-puffing, smoke spillage, and to maximize performance.

Chimneys perform two functions - one

of which is apparent: The chimney provides a means for exhausting smoke and flue gases resulting from combustion of the fuel. Secondarily, though, the chimney provides "Draft" which allows oxygen to be continuously introduced into the appliance, so that proper combustion is possible. As of April 1, 1987, all heaters and furnaces manufactured by United States Stove Company should be installed using a factory built chimney that meets the "Type HT" requirement of UL 103 (when a factory - built chimney is used).

IMPORTANT

*Size the chimney to the flue outlet on the stove. (6" outlet = 6" I.D. chimney) *Avoid using elbows except as necessary (they reduce draft).

*Make sure all horizontal runs of con- nector pipe go up hill (1/4" elevation for each horizontal foot).

27				CIRCULATOR
	11		1
10	11	13	3

	CHIMNEY CAP MANDATORY			CHIMNEY CAP MANDATORY
				CHIMNEY CAP MANDATORY
	2 FT MIN.			2 FT MIN.
				2 FT MIN.
10 FT.	3 FT.	11 FT. MIN.	10 FT.	3 FT.	11 FT. MIN.
10 FT.	MIN.			3 FT.	11 FT. MIN.
	MIN.			MIN.
				MIN.

		20			24 12	32	4	HEATER
		15 19		14	23
21		17	17	18
22	16	17	17	18
20				29
21			26
	22	16	26

REFER TO CHIMNEY

MANUFACTURERS PARTS

AND INSTRUCTIONS

PIPE

DAMPER

BAROMETRIC

DRAFT CONTROL

(OPTIONAL)

FLOOR PROTECTOR

FIG. 5

REFER TO CHIMNEY

MANUFACTURERS PARTS

AND INSTRUCTIONS

PIPE

DAMPER

BAROMETRIC

DRAFT CONTROL

(OPTIONAL)

FLOOR PROTECTOR

FIG. 6

Cathedral Ceiling - Chimney

Cap Mandatory

2941 specifications

The United States Stove Company is renowned for its high-quality and efficient heating solutions, and the United States Stove 2941 is no exception. This remarkable wood-burning stove blends modern technology with traditional craftsmanship, making it a popular choice for homeowners seeking an effective and stylish heating option.

The United States Stove 2941 features a robust construction with a cast iron door and heavy-duty steel body that ensures durability while providing optimal heat retention. Its compact design makes it suitable for smaller spaces, while its 1.4 cubic foot firebox can accommodate logs up to 18 inches in length. This size allows for efficient burning and provides ample heat for rooms up to 1,200 square feet, ideal for living areas, cabins, or even as a supplementary heat source in larger homes.

One of the standout characteristics of the 2941 is its advanced air wash system, which helps keep the glass door clean and clear of soot. This feature not only allows for a beautiful view of the flames but also reduces the need for frequent maintenance, allowing users to enjoy more time by the fire and less time cleaning. The stove also features a built-in ash pan, which simplifies ash removal and keeps the area around the stove tidy.

The efficiency of the United States Stove 2941 is further enhanced by its secondary combustion technology. This innovative design allows for a more complete burn of the wood fuel, significantly reducing emissions and maximizing heat output. With a reported efficiency rating of up to 78%, users can enjoy warmth without compromising environmental standards.

Additionally, the 2941 is equipped with an adjustable air control system, allowing users to easily manage the burn rate and heat output. This flexibility makes it easy to customize the heating experience based on personal preferences and the specific heating demands of the space.

In conclusion, the United States Stove 2941 stands out due to its combination of durability, efficiency, and modern technologies. With features like a clean glass door, ash pan, and secondary combustion, it provides a reliable heating solution while keeping maintenance to a minimum. Whether for primary or supplemental heating, the 2941 is designed to offer comfort and warmth during the colder months, making it a great addition to any home.