Through the ROOF/CEILING Installation

Installation

THROUGH THE WALL INSTALLATION (RECOMMENDED INSTALLATION)

To vent the unit through the wall, connect the pipe adapter to the exhaust motor adapter. If the exhaust adapter is at least 18-inches above ground level, a straight section of pellet vent pipe can be used through the wall.

Your furnace dealer should be able to provide you with a kit that will handle most of this installation, which will include a wall thimble that will allow the proper clearance through a combustible wall. Once outside the structure, a 3-inch clearance should be maintained from the outside wall and a clean out tee should be placed on the pipe with a 90-degree turn away from the house. At this point, a 3-foot (minimum) vertical section of pipe should be added with a horizontal cap, which would complete the installation.

A support bracket should be placed just below the termination cap or one every 4-feet to make the system more stable. If you live in an area that has heavy snowfall, it is recommended that the installation be taller than 3-feet to get above the snowdrift line. This same installation can be used if your furnace is below ground level by simply adding the clean-out section and vertical pipe inside until ground level is reached. With this installation you have to be aware of the snowdrift line, dead grass, and leaves. We recommend a 3-foot minimum vertical rise on the inside or outside of the house.

The “through the wall” installation is the least expensive and simplest installation. Never terminate the end vent under a deck, in an alcove, under a window, or between two windows. We recommend Simpson Dura-Vent®or Metal-Fab®kits.

When venting the furnace through the ceiling, the pipe is connected the same as through the wall, except the clean-out tee is always on the inside of the house, and a 3-inch adapter is added before the clean-out tee.

You must use the proper ceiling support flanges and roof flashing (supplied by the pipe manufacturer; follow the pipe manufacturer’s directions). It is important to note that if your vertical run of pipe is more than 15-feet, the pellet vent pipe size should be increased to 4-inches in diameter.

Do not exceed more than 4-feet of pipe on a horizontal run and use as few elbows as possible. If an offset is required, it is better to install 45-degree elbows rather than 90-degree elbows.

Vertical Cap

Storm Collar

Adjustable Roof Flashing Cathedral Ceiling Support Box Pipe

45° Elbow

90° Elbow Horizontal Cap Wall Thimble

Black Ceiling Support Firestop Spacer Single Tee with Clean-Out Adapter Tee Support Bracket

Double Tee with Clean-Out Adapter

USSC

6110 specifications

The United States Stove 6110 is a highly regarded wood-burning stove known for its efficiency and versatility. Designed to provide both warmth and a welcoming ambiance, this stove is ideal for homeowners seeking a reliable heating solution. Its classic design combines a functional aesthetic with advanced technology, making it a favorite among consumers.

One of the standout features of the United States Stove 6110 is its impressive heat output. With a heating capacity of up to 2,200 square feet, this stove can effectively warm large areas, making it suitable for both living rooms and larger open spaces. It achieves this through a robust firebox that holds a generous amount of wood, allowing for extended burn times and reducing the frequency of refueling.

The stove incorporates a secondary combustion system designed to maximize efficiency. This technology ensures that the gases produced during the burn process are effectively consumed before being released into the atmosphere. As a result, the 6110 demonstrates lower emissions while maximizing heat output—a critical factor for environmentally conscious consumers. Additionally, the unit boasts an EPA certification, affirming its compliance with strict emissions regulations.

Another significant characteristic of the United States Stove 6110 is its construction. Made from high-quality materials, the stove features heavy-duty steel that ensures durability and longevity. The cast iron door is another highlight, providing a classic look while offering a large viewing area to enjoy the beauty of the flames while maintaining heat retention.

The versatility of the 6110 is further enhanced by its adjustable air intake system, which allows users to control the burn rate and heat output according to their needs. This feature not only improves fuel efficiency but also empowers users to customize their heating experience, making it an ideal choice for various climates and personal preferences.

In terms of safety, the stove is equipped with a firebrick-lined interior that enhances heat retention and protects the exterior surfaces from overheating. This ensures that the stove operates safely and efficiently, minimizing the risks associated with wood burning.

Overall, the United States Stove 6110 combines exceptional heating performance, advanced technology, and classic design, making it a standout choice for anyone looking to enhance their home’s warmth and comfort. Whether for a cozy cabin or a family home, this stove promises reliable and efficient heating for many winters to come.