Trouble Shooting, Problem | United States Stove 6110 specification

Trouble Shooting

Disconnect the power cord before performing any maintenance! NOTE: Turning the ON/OFF Switch to ”OFF” does not disconnect all power to the electrical components of the furnace.

Never try to repair or replace any part of the furnace unless instructions for doing so are given in this manual. All other work should be done by a trained technician.

PROBLEM	CAUSE: Too rich air/fuel mixture
Orange, lazy flame_excessive fuel	•	Clean out the burnpot and burnpot housing
build-up in the burnpot	•	Adjust the air damper on the front of the furnace to an open position.
	•
	•	Make sure that the viewing door is closed and sealed properly. If not,
	check door gasket..
	•	Check that all outside connections are clear of any obstructions.
	•	Check the exhaust system; clean as needed.


PROBLEM	CAUSE: Burnpot burns out of fuel
Fire goes out or furnace shuts down.	•	Hopper is empty, refill the hopper.
	•	Loss of draft pressure. Make sure that the viewing door is closed and
	sealed properly. Check that all outside connections are clear of any
	obstructions. Check the exhaust system; clean as needed.
	•	Check that the pressure switch connection to the firebox is free of ash or
	clear of obstructions.
	•	Auger system is jammed or there is a “bridging” of the fuel in the hopper,
	preventing fuel from flowing into the auger feed system.
	•	Stove may be shutting down to an over temperture condition.


PROBLEM	CAUSE: Not enough combustion air; Fuel has too much moisture.
Viewing window becoming black shortly	•	Adjust the air damper to a more open position.
after start-up.	•	Use a fuel with less moisture content
	•	Use a fuel with less moisture content


PROBLEM	CAUSE: Not enough combustion air; Fuel has too much moisture.
“Black Popcorn” is present in the burn	•	Adjust the air damper to a more open position.
chamber.	•	Use a fuel with less moisture content
	•	Use a fuel with less moisture content
	•	Stove might be cycling excessively due to temperature cut backs.
	•	Reduce heat setting

PROBLEM	CAUSE: Chemical reaction between the starch in corn and the heat.
“Clinkers” form in burnpot.	•	Add calcium carbonate (aka chicken scratch or oyster shell).
	•	Adjust air mixture
	•	Use corn with less moisture or starch.


PROBLEM	CAUSE: Unit is reaching the “Almost Over-temp” preset.
Unit cycles up and down when on the	•	Adjust the heat range to lower setting.
“HIGH” heat setting.	•	Fuel burns hot causing the furnace to cycle between high setting and
	•
	lower settings.

PROBLEM	CAUSE: Corn is wet or it has a very high moisture content.
Corn builds up and is not burning com-	•	Use corn with a moisture content of 11% or less for best results.
pletely. Steam is coming from the corn.

USSC

6110 specifications

The United States Stove 6110 is a highly regarded wood-burning stove known for its efficiency and versatility. Designed to provide both warmth and a welcoming ambiance, this stove is ideal for homeowners seeking a reliable heating solution. Its classic design combines a functional aesthetic with advanced technology, making it a favorite among consumers.

One of the standout features of the United States Stove 6110 is its impressive heat output. With a heating capacity of up to 2,200 square feet, this stove can effectively warm large areas, making it suitable for both living rooms and larger open spaces. It achieves this through a robust firebox that holds a generous amount of wood, allowing for extended burn times and reducing the frequency of refueling.

The stove incorporates a secondary combustion system designed to maximize efficiency. This technology ensures that the gases produced during the burn process are effectively consumed before being released into the atmosphere. As a result, the 6110 demonstrates lower emissions while maximizing heat output—a critical factor for environmentally conscious consumers. Additionally, the unit boasts an EPA certification, affirming its compliance with strict emissions regulations.

Another significant characteristic of the United States Stove 6110 is its construction. Made from high-quality materials, the stove features heavy-duty steel that ensures durability and longevity. The cast iron door is another highlight, providing a classic look while offering a large viewing area to enjoy the beauty of the flames while maintaining heat retention.

The versatility of the 6110 is further enhanced by its adjustable air intake system, which allows users to control the burn rate and heat output according to their needs. This feature not only improves fuel efficiency but also empowers users to customize their heating experience, making it an ideal choice for various climates and personal preferences.

In terms of safety, the stove is equipped with a firebrick-lined interior that enhances heat retention and protects the exterior surfaces from overheating. This ensures that the stove operates safely and efficiently, minimizing the risks associated with wood burning.

Overall, the United States Stove 6110 combines exceptional heating performance, advanced technology, and classic design, making it a standout choice for anyone looking to enhance their home’s warmth and comfort. Whether for a cozy cabin or a family home, this stove promises reliable and efficient heating for many winters to come.

Trouble Shooting

PROBLEM

6110 specifications