United States Stove 6110 owner manual Error Codes, Flashing Indicators

Page 23

Error Codes

Below is a chart describing the Error Codes that might be displayed if an error occurs with your furnace.

Error

Error

Possible

Code

Descrption

Causes

Err1

The high limit temperature sensor

Inadequate ventilation.

 

has tripped.

Room fan failure.

 

 

Exhaust Blockage.

 

 

• Electrical Open in the over temperature switch or wiring.

Err2

Furnace ran out of fuel during normal

Hopper Empty.

 

operation.

• Auger output failure or jam.

 

 

• Flame of fuel quality caused fire to burn too slowly or go out.

 

 

• Electircal Open in low temperature switch or wiring.

 

 

 

Err3

The furnace was unable to reach the

• Flame or Fuel quality caused the fire to burn too slowly or go

 

Room Fan On temperature within the

out.

 

startup time.

Auger output failure or jam Hopper empty on startup.

Err4

The power failed while the furnace was

• Electrical Open in low temperature switch or wiring.

 

hot, and when power was restored, the

Power loss

 

fire was out.

• Electrical Open in low temperature switch or wiring.

Err5

The Auger output fuse has blown.

• Auger motor jammed or bad.

 

 

 

Err6

The Agitator output fuse has blown.

• Agitator motor jammed or bad.

Err7

The Draft Fan (Exhaust Fan) output

• Draft Fan motor jammed or bad.

 

fuse has blown.

 

 

Err8

The Room Fan blower output fuse has

• Room fan motor jammed or bad.

 

blown.

 

 

Flashing Indicators

Several situations or events are indicated in normal operation by blinking display indicators or segments in the display:

Flashing On Indicator : This means that the furnace is in the “Lighting” state waiting for either a 3 minute timeout to begin burning or for the furnace to reach the warm temperature whichever comes first.

Flashing Off Indicator : This indicates that the furnace is in the “Shutdown” state waiting for the OFF button, or for a 15 minute period after the furnace was turned off, or for the furnace to cool down, or for the door to be closed.

Flashing dash “-“ in Heat Range Display : This indicates that the furnace is in the normal run mode and is ramping from the current heat range setting to the target heat range setting. Once the ramp is complete, the “-“ will stop flashing. For ramping from heat range 1 to 3, the default time is 90 seconds between internal settings.

Flashing Automatic Mode Indicator : This indicates that the furnace is in normal operation and is running in the automatic mode. However, either the Draft Fan or Auxiliary setting is manually configured.

Flashing Draft Fan Setting Indicator : This indicates that the furnace is in normal operation and that the vacuum sensor detects a loss of pressure either because the door is open or because there is a negative pressure in the room with respect to the exhaust.

Flashing Heat Range Setting Indicator : This indicates that the furnace is in normal operation and that an overtemperature condition exists causing the fuel to stop.

Flashing Auger Delay Indicator : This indicates that the furnace is in normal operation and that the hopper lid is open.

USSC

23

Image 23
Contents United States Stove Company Table of Contents Safety Precautions Safety and EPA Compliance SpecificationsFuel Considerations WAX ContentFloor Protection InstallationInstallation Options Additional Items Needed for InstallationClearances Pellet Vent Type Pellet Vent InstallationVenting Requirements Maximum Venting DistanceVent Termination Clearances Through the ROOF/CEILING Installation Through the Wall Installation Recommended InstallationPrimary Furnace Secondary ADD-ON Furnace HOW Your Furnace Works Damper Control AdjustmentOperation Control Panel Unit Preparation START-UP ProcedureShut Down Procedure Exhaust System MaintenanceSafety and Convenience Features Daily OperationGaskets Check and Clean the HopperInterior Chambers ASH DisposalParts Diagram Title Qty Parts ListParts Diagram Parts List Wiring Diagram Problem Trouble ShootingFlashing Indicators Error CodesHOW to Order Repair Parts

6110 specifications

The United States Stove 6110 is a highly regarded wood-burning stove known for its efficiency and versatility. Designed to provide both warmth and a welcoming ambiance, this stove is ideal for homeowners seeking a reliable heating solution. Its classic design combines a functional aesthetic with advanced technology, making it a favorite among consumers.

One of the standout features of the United States Stove 6110 is its impressive heat output. With a heating capacity of up to 2,200 square feet, this stove can effectively warm large areas, making it suitable for both living rooms and larger open spaces. It achieves this through a robust firebox that holds a generous amount of wood, allowing for extended burn times and reducing the frequency of refueling.

The stove incorporates a secondary combustion system designed to maximize efficiency. This technology ensures that the gases produced during the burn process are effectively consumed before being released into the atmosphere. As a result, the 6110 demonstrates lower emissions while maximizing heat output—a critical factor for environmentally conscious consumers. Additionally, the unit boasts an EPA certification, affirming its compliance with strict emissions regulations.

Another significant characteristic of the United States Stove 6110 is its construction. Made from high-quality materials, the stove features heavy-duty steel that ensures durability and longevity. The cast iron door is another highlight, providing a classic look while offering a large viewing area to enjoy the beauty of the flames while maintaining heat retention.

The versatility of the 6110 is further enhanced by its adjustable air intake system, which allows users to control the burn rate and heat output according to their needs. This feature not only improves fuel efficiency but also empowers users to customize their heating experience, making it an ideal choice for various climates and personal preferences.

In terms of safety, the stove is equipped with a firebrick-lined interior that enhances heat retention and protects the exterior surfaces from overheating. This ensures that the stove operates safely and efficiently, minimizing the risks associated with wood burning.

Overall, the United States Stove 6110 combines exceptional heating performance, advanced technology, and classic design, making it a standout choice for anyone looking to enhance their home’s warmth and comfort. Whether for a cozy cabin or a family home, this stove promises reliable and efficient heating for many winters to come.