4 | Unfold paper trays |
|
a | b | c |
5
a
b
Attach the control panel faceplate (if not attached)
a Fit the faceplate tabs into the slots on top of the device.
b Rotate the faceplate down. Then firmly press down on the front corners until they both snap into place.
IMPORTANT: Make sure that all edges are even with the device, and that all buttons come through the holes in the faceplate.
The control panel faceplate must be attached for the
HP
6 Load paper
Load plain white paper into the bottom tray.
Do not force paper too far into the input tray, or it might cause a paper jam.
2 • HP