Rules for Connector Pipe Installation

OPERATING INSTRUC-

1.The crimped end of the stovepipe fits inside the heater flue collar. Install ad- ditional pipe and elbow with the

CRIMPED END TOWARD THE HEATER. This will allow any condensation in the flue to run back into the heater. Smoke will not escape when installed in this manner.

2.Slope any horizontal pipe upward toward the chimney at least 1/4 inch for each foot of horizontal run.

3.You must have at least 18 inches of clearance between any horizontal pip- ing and the ceiling.

4.The pipe cannot extend into the chimney flue. (Fig. 8)

5.Seal each connector pipe joint with furnace cement. Also seal the pipe at the chimney.

6.Use 3 Sheet Metal screws at each joint to make the piping rigid.

7.It is recommended that no more than two 90 degree bends be used in the stovepipe installation as more than two may decrease the amount of draw. If possible, use only corrugated (non-ad- justable) elbows. They are much more airtight.

8.The chimney connector must not pass through an attic or roof space, closet, or any concealed space, or floor, ceiling, wall or combustive construction.

TIONS

FUEL

Hardwood, 18" to 23" should be split and air dried (seasoned) for 6 months to obtain maximum burning efficiency.

Wood should be stored in a dry, well ventilated area. A Wooden box or crate is ideal for storage.

NOTE: USE SOLID WOOD MATERIAL ONLY. DO NOT USE COAL.

DO NOT USE MANUFACTURED OR CHARCOAL LOGS!

LIGHTING

1.Set the thermostat on "High" for maximum draft.

2.Open the feed door and place paper and kindling on the grate for starting the fire.

3.Light fire and close feed door.

4.Add fuel after fire is burning briskly. Use care not to smother the kindling fire.

5.Set thermostat higher or lower for desired temperature.

ADDING FUEL

CAUTION: BUILD A FIRE ON THE INTEGRAL GRATE THAT IS PRO- VIDED WITH THE HEATER.

CAUTION: STORING OF WOOD WITHIN MINIMUM CLEARANCES OF HEATER MAY CAUSE HOUSE FIRE.

CAUTION: DO NOT OVERFIRE THE HEATER, AS STATED EARLIER, THIS CAN PRODUCE A DANGEROUS CONDITION AND EVEN CAUSE A HOUSE FIRE. IF ANY PORTION OF THE HEATER OR ANY CHIMNEY CONNECTOR GLOWS RED OR DIS- COLORS, THE HEATER IS BEING OVERFIRED.

CAUTION: DO NOT OPERATE THIS HEATER WITH FEED OR ASH DOOR OPEN. THIS HEATER IS DESIGNED FOR THERMOSTATIC OPERATION. OPERATION WITH EITHER DOOR OPEN WILL OVERHEAT AND DAM- AGE THE HEATER.

CAUTION:NEVER STORE FLAM-

RIGHT

WRONG

Fig. 8

WRONG

When possible, add small amounts of fuel each hour or so instead of adding large quantities of fresh fuel every 4 to 5 hours. This will give more complete combustion and less build-up of tars or soot in the chimney.

1.Set Thermostat to HIGH before open- ing feed door.

2.Empty ash pan regularly. Do not allow ashes to build up to grate as grate will warp and burnout will occur, and you might spill the ashes when remov- ing the pan. Dispose of hot ashes prop- erly (see Note 11 on Page 3).

MABLE LIQUIDS, ESPECIALLY GASOLINE, IN THE VICINITY OF THE HEATER.

CAUTION: NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR "FRESHEN UP" A FIRE IN THE HEATER.

2931 specifications

The United States Stove 2931 is a remarkable wood-burning stove that combines efficiency, style, and functionality, making it an excellent choice for homeowners seeking an effective heating solution. Designed with both aesthetics and performance in mind, this stove has garnered a reputation for its reliability and ease of use.

One of the key features of the U.S. Stove 2931 is its efficient heating capacity. With a maximum heating capacity of up to 2,000 square feet, it is perfect for medium to large-sized spaces. The stove is designed to provide long burn times, ensuring that your home stays warm and cozy even during the coldest winter nights. Users can expect an impressive burn time that can stretch up to 8 hours, depending on the type of wood used and the load size.

The stove is constructed from heavy-duty cast iron and steel, providing durability and extended service life. Its robust build ensures that it can withstand high temperatures, while also allowing for better heat retention. The combination of materials also enhances the overall aesthetic appeal of the stove, making it a stylish addition to any room.

One of the standout technologies integrated into the U.S. Stove 2931 is the unique air control system. This system allows users to easily regulate the airflow into the stove, enhancing combustion efficiency. By controlling the air intake, homeowners can optimize the burn rate, extending fuel efficiency and significantly reducing smoke emissions. This not only contributes to a cleaner environment but also ensures that the stove meets stringent EPA guidelines.

Additionally, the U.S. Stove 2931 features a large viewing window, allowing users to enjoy the visual ambiance of the flames while also monitoring the fire's behavior. This glass window is designed to withstand high temperatures and is positioned for optimal visibility, adding a welcoming touch to the living space.

The stove is equipped with an easily accessible ash pan, simplifying the cleaning process. This feature ensures that maintenance is hassle-free, allowing users to spend more time enjoying the comforting warmth of their stove and less time on upkeep.

In conclusion, the United States Stove 2931 is a well-crafted, efficient wood-burning stove that offers a combination of functionality, durability, and style. With its impressive heating capacity, effective air control system, and user-friendly design, this stove is an ideal choice for anyone looking to enhance their home heating experience.