United States Stove 2931 F36 Blower KIT, Locating the Heater, Solid Flue Damper, Installation

Page 4

LOCATING THE HEATER

AS A LOCATION IS SELECTED, KEEP THE FOLLOWING IN MIND:

1.The chimney connection should be as short as possible. The heater must have its own chimney flue. Do not connect this unit to a chimney flue serving another appliance. If there is no chimney near where you wish to place the heater, you can use a UL 103HT Residential Type and Building Heating Appliance Chimney (Fig. 5,6,6A,&6B).

2.Place the heater on solid masonry or solid concrete. When the heater is used on a com- bustible floor protector of one layer of 3/8" millboard having a thermal conductivity of K=0.84 BTU in./ft. 2 hr. Deg. F with 28-gauge sheet metal or a UL Listed floor protector. Have the floor protector extend 16" beyond the door side of the heater and under the connector pipe in the back.

3.Check Figures 2, 3, and 4. Be sure you have the clearances shown from the heater and the connector pipe to combustible surfaces. If you have a SOLID brick or stone wall behind your heater, you can place the heater as close as you wish to the wall. If the wall is only faced with brick or stone, treat it as a combustible wall.

STOP: Before connecting

the flue pipe, check the

"SOLID FLUE DAMPER

INSTALLATION". (page 6)

NOTE: BEFORE FIRING

HEATER

1.Remove plastic knob from inside of cabinet door and install on outside of door.

(See Page 15)

2.Slide firebricks toward the

rear so no gaps remain

between them.

CAUTION:

Keep furnishings and other combustible materials away from the heater.

F36 BLOWER KIT

An Optional Blower kit is available for the 2931 Wonderwood automatic wood burning circulator heater. If this kit is not available where you have purchased this Wonderwood heater, you can purchase the F36 Blower Kit directly from the factory. To order contact the United States Stove Company at the address and telephone number given on the back page.

Fig. 2

20"

16"

17"

Fig. 3

27"

12"

54"

NON-COMBUSTIBLE CONSTRUCTION IN ACCORDANCE WITH NFPA 211

12"

Fig. 4

36"

 

19 1/4"

NOTE: DASHED LINES SHOW STRAIGHT UP AND THROUGH THE WALL INSTALLATION

32 1/4"

16"

4 3/4"

10"

 

SIDEWALL FLOOR PROTECTOR (TOP VIEW)

4

21

Page 3 Page 5
Image 4
Page 3 Page 5
Contents HOW to Order Repair Parts Safety NoticeTools and Material Needed Circulator DimensionsTools Materials Rules for Safe Installation and Operation Stop Before connecting Flue pipe, check INSTALLATION.F36 Blower KIT Locating the HeaterInstalling Flue Collar Safety NoticeSolid Flue Damper Installation Description QtyChimney Connection Cathedral Ceiling Chimney Cap MandatoryThru-The-Wall Installation Description QTYVenting Into a Fireplace Not recommendedCabinet Door Knob Assembly Fireplace InstallationChimney Maintenance CREOSOTE-FORMATION and Need for Removal Service HintsAnother appliance burning other fuels Set thermostat higher or lower for desired temperature Rules for Connector Pipe InstallationSet Thermostat to High before open- ing feed door

2931 specifications

The United States Stove 2931 is a remarkable wood-burning stove that combines efficiency, style, and functionality, making it an excellent choice for homeowners seeking an effective heating solution. Designed with both aesthetics and performance in mind, this stove has garnered a reputation for its reliability and ease of use.

One of the key features of the U.S. Stove 2931 is its efficient heating capacity. With a maximum heating capacity of up to 2,000 square feet, it is perfect for medium to large-sized spaces. The stove is designed to provide long burn times, ensuring that your home stays warm and cozy even during the coldest winter nights. Users can expect an impressive burn time that can stretch up to 8 hours, depending on the type of wood used and the load size.

The stove is constructed from heavy-duty cast iron and steel, providing durability and extended service life. Its robust build ensures that it can withstand high temperatures, while also allowing for better heat retention. The combination of materials also enhances the overall aesthetic appeal of the stove, making it a stylish addition to any room.

One of the standout technologies integrated into the U.S. Stove 2931 is the unique air control system. This system allows users to easily regulate the airflow into the stove, enhancing combustion efficiency. By controlling the air intake, homeowners can optimize the burn rate, extending fuel efficiency and significantly reducing smoke emissions. This not only contributes to a cleaner environment but also ensures that the stove meets stringent EPA guidelines.

Additionally, the U.S. Stove 2931 features a large viewing window, allowing users to enjoy the visual ambiance of the flames while also monitoring the fire's behavior. This glass window is designed to withstand high temperatures and is positioned for optimal visibility, adding a welcoming touch to the living space.

The stove is equipped with an easily accessible ash pan, simplifying the cleaning process. This feature ensures that maintenance is hassle-free, allowing users to spend more time enjoying the comforting warmth of their stove and less time on upkeep.

In conclusion, the United States Stove 2931 is a well-crafted, efficient wood-burning stove that offers a combination of functionality, durability, and style. With its impressive heating capacity, effective air control system, and user-friendly design, this stove is an ideal choice for anyone looking to enhance their home heating experience.
Top Page Image Contents