o Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure.
oWhen refitting, make sure that the glass is correctly seated in the door recess and the correct way round. You should slide the door glass back into its original position.
oUsing a screwdriver fully tighten the screws that you removed previously.
oIMPORTANT: Do not attempt to remove the door glass only using one hand.
oIMPORTANT: Care must be taken when cleaning between the door glasses, and inside the inner frame as some of the edges maybe sharp due to the manufacturing process.
Installation
The installation must be carried out by a suitably qualified person, in accordance with the current version of the following.
oUK Regulations and Safety Standards or their European Norm Replacements.
o Building Regulations (issued by the Department of the Environment).
o Building Standards (issued by the Scottish Development Department).
oIEE Wiring Regulations.
oElectricity At Work Regulations.
o Gas Safety (Installation and Use) (Amendment)
Regulations.
Positioning
The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above the ambient temperature of the room it is located in, whilst the appliance is in use.
oYour appliance is heavy, so you should be careful when moving or positioning it.
oDo not try to move the cooker by pulling on either the door, handle or control panel.
26
