Baumatic BC190.2TCSS specification

Gas adjustment (Conversion to LPG for the hob top)

All work must be carried out by a GASSAFE registered engineer.

IMPORTANT: Always isolate the cooker from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners.

o Remove the pan-stands, burners and flame spreaders.

oUnscrew the injector and replace it with the stipulated injector for the new gas supply (see table below).

Burner	Types	Pressure	Injector	Gas			Power
	of gas	(mbar)	Marking	consumption			(kW)
			(1/100	g/h		l/h	Max.	Min.
			mm)
Auxiliary	Natural	20	72	-		95	1.00	0.48
	(G20)
	Butane	30	50	73		-
	(G30)
	Propane	37	50	71		-
	(G31)
Semi-	Natural	20	97	-		167	1.75	0.60
rapid	(G20)

32

Image 32

Baumatic BC190.2TCSS manual Gas adjustment Conversion to LPG for the hob top

Contents

KirThat1 BC190.2TCSS Contents Environmental note Important safety information General Information Child Safety General SafetyBecome hot during use and retain heat after operation Do not Leave the Appliance Unattended Whilst in USEPage Declaration of conformity CleaningInstallation Specifications Product dimensionsProduct specifications Burner gas hob Flame failure device on each burner o Gas oven with grill Rated VoltageSupply Connection Fuse Rating Mains Supply Lead Minute minder control knob Control Panel Main oven and grill control knobHob control knobs Before first use Using your gas range cookerSwitching the gas oven on Switching the gas grill on Fitting the grill deflector Using the minute minder Oven light Cooking guidelines Shelf levels Gas mark temperaturesGas mark number Temperature C Base burner appliances Temperature C Shelf Approximate Position Cooking time Meat Cooking tableFish Pastry Using the hob top Automatic ignition with flame failure safety device Energy saving tips Minimum Maximum Diametre Cleaning and maintenance Cleaning the hob burners Maintaining the cast iron pan stands Removing the oven door for cleaning Replacing the oven bulb Reset the Movable Hooks Removing the inner door glass for cleaning Installation PositioningPage Page Ventilation requirements Gas connectionImportant information Gas Safety Installation and Use Regulations Gas connection Gas adjustment Conversion to LPG for the hob top Minimum flow adjustment for hob gas taps Gas adjustment Conversion to LPG for the oven and grill Important On completion carry out a gas tightness test Minimum flow adjustment for the oven and grill burners Fitting a stability chain Electrical connection Replacing the mains supply cable Connecting the mains supply cableSwitch the appliance off at the control switch My appliance isn’t working correctly Do not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone