HP 3050 J610A CH376A#B1H manual Connectivity, Add the HP All-in-One to a network, Use PIN method

7 Connectivity

Add the HP All-in-One to a network

•WiFi Protected Setup (WPS)

•Traditional Wireless Connection

•USB Connection

WiFi Protected Setup (WPS)

To connect the HP All-in-One to a wireless network using WiFi Protected Setup (WPS), you will need the following:

❑A wireless 802.11 network that includes a WPS-enabled wireless router or access point.

❑A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.

To connect the HP All-in-One using WiFi Protected Setup (WPS)

1.Do one of the following:

Use Push Button (PBC) method

▲Set up wireless connection.

❑Press the wireless button on the control panel to show the wireless menu options on the printer display.

❑Select Wireless Settings on the printer display.

❑Select WPS.

❑Select Push Button and follow the on-screen instructions on the printer display.

NOTE: The product begins a timer for approximately two minutes in which the corresponding button on the networking device needs to be pressed.

Use PIN method

▲Set up wireless connection.

❑Press the wireless button on the control panel to show the wireless menu options on the printer display.

❑Select Wireless Settings on the printer display.

❑Select WPS.

❑Select PIN. The printer display will display a PIN.

Connectivity

Add the HP All-in-One to a network 35