use the copy features
3Press Start Copy, Black or Start Copy, Color.
4If you placed your first original on the glass you will be prompted to Place 2nd original on glass, then press Enter.
shift image to increase the margin
The MarginShift feature lets you shift the image to the left or right to increase the margin for binding. You can also adjust the reduction/enlargement percentage in this mode by entering a number on the numeric keypad.
OriginalMarginShift
1Load the original on the glass or in the ADF.
2Press Special Features until MarginShift 100% appears.
3Press or to shift the margin to the left or to the right. Each step is a
4If you wish to change the reduction/enlargement percentage as well, enter a number using the keypad, then press Enter.
Tip: If you do not wish to change the reduction/enlargement percentage, press Enter after you have selected the amount of MarginShift you want.
5Press Start Copy, Black or Start Copy, Color.
make two-sided copies
The
Note: You can make
1Load your letter- or
You cannot make
2Press the
reference guide | 33 |