United States Stove 5660(I) manual Cleaning

Page 32

MAINTENANCE ‐ continued

Cleaning

Heat Exchanger Tubes – Your Pellet Stove Room Heater is designed with a built in heat exchanger tube cleaner. This should be used every 2 or 3 days to remove ash build up on the heat exchanger tubes, which can reduce heat transfer. The handle, for the heat exchanger tube cleaner, is located in front of the vent tubes on front side of heater. Slide the rod front to back several times to clean the tubes then follow the instructions for ash removal.

Figure 26

WARNING: DO NOT ATTEMPT TO OPERATE THE HEAT EXCHANGE TUBE

CLEANER WHILE THE PELLET STOVE IS IN OPERATION OR COOLING

DOWN; WAIT UNTIL PELLET STOVE HAS COOLED COMPLETELY BEFORE

PERFORMING THIS PROCEDURE.

Fans – DANGER: RISK OF ELECTRIC SHOCK. DISCONNECT POWER BEFORE SERVICING UNIT

Over time ash or dust may accumulate on the blades of the circulation & exhaust fans. The fans should be inspected, periodically, and if any accumulation is present vacuumed clean as the ash or dust can impede the fans performance. It is also possible that creosote may accumulate in the exhaust fan, this must be brushed clean.

The exhaust fan can be found behind the left side panel (facing the front of the heater), the circulation fan can be found behind the right side panel. To access the igniter, remove the air inlet tube and cover (2 screws) (Figure 27).

Note: When cleaning take care not to damage the fan blades.

Figure 27

32

Image 32
Contents Installation and Operating Manual Models Table of Contents Introduction Safety Information USE of Solid Wood Fuel is Prohibted by LAWSafety Information ‐ Specifications DimensionsDimensions ‐ Operating Instructions Check and Fill the Fuel Hopper with PelletsPre‐start Check‐up Lighting InstructionsOperating Instructions ‐ AugerCirculation Air Flow Auger TrimOperating Instructions ‐ Safety Features and warning code Thermostat Installation Installation of Remote ThermostatClearances to Combustibles Installing Your Room Heater Installing Your Room Heater ‐ Horizontal Exhaust Vent InstallationInstalling Your Room Heater ‐ Freestanding Interior Vertical Installation Freestanding Exterior Vertical Installation Page Selkirk DIRECT‐TEMP Vent System for Pellet Stove Heaters UP & OUT Horizontal Termination KIT Straight OUT Horizontal Termination KIT Through the Roof Vertical Termination KIT Mobile Home Installation Insert Pellet Stove Installation Insert Pellet Stove Installation ‐ Minimum Clearance to Combustibles and Floor Protection Floor ProtectionInstallation into a Masonry Fireplace Vent Termination Locations Maintenance Burn PotMaintenance ‐ Ash Removal ‐ Freestanding UnitAsh Removal ‐ Insert Unit Disposal of AshesCleaning Chimney/Vent System Cleaning Door GasketsTrouble Shooting Trouble Shooting ‐ 200oF High‐limit switch has trippedHeater Flame keeps going out on LOW setting Auger motor does not function normallyTrouble Shooting ‐ Wiring Diagram Replacement Parts Stove BrightLimited Warranty

5660(I) specifications

The United States Stove 5660(I) is a powerful pellet stove designed to provide efficient heating while boasting modern features and a user-friendly interface. Known for its high performance and reliability, this stove is a popular choice for homeowners seeking an effective heating solution for their living spaces.

One of the standout features of the 5660(I) is its capacity to produce up to 50,000 BTUs, making it suitable for heating areas up to approximately 2,500 square feet. This impressive heating capacity ensures that even larger rooms can be warmed quickly and efficiently, contributing to energy savings and comfort during the colder months.

The stove operates primarily on wood pellets, which are an environmentally friendly fuel choice. Wood pellets are made from compressed sawdust and provide a renewable heating source that burns cleanly and efficiently. The use of pellets not only minimizes emissions but also allows the stove to deliver consistent heat output.

In terms of technology, the United States Stove 5660(I) incorporates advanced features to enhance user experience. The stove is equipped with a digital control panel, offering easy programming options for both heating schedules and temperature settings. This digital interface allows homeowners to customize heating preferences, ensuring a comfortable atmosphere without excessive manual adjustments.

Another notable characteristic of the 5660(I) is its large hopper capacity, holding up to 60 pounds of pellets. This feature extends the time between refueling sessions, allowing for more extended periods of operation without interruption. The stove also features an automatic ignition system, simplifying the startup process and making it convenient for users.

The design of the 5660(I) is not just about functionality; it also boasts an aesthetic appeal. With its sleek and contemporary look, it can seamlessly integrate into various home decors. The stove comes in multiple finishes, allowing homeowners to choose a model that best matches their style.

Safety is also a priority with the United States Stove 5660(I). The unit includes various safety features, including an automatic shut-off function in case of a malfunction, ensuring peace of mind while the stove is in use. The high-efficiency burn system minimizes the amount of ash produced, making maintenance less of a chore.

In summary, the United States Stove 5660(I) combines performance, efficiency, and aesthetic appeal, presenting an excellent heating solution for any home. Its advanced features, ease of use, and eco-friendly fuel choice make it a top contender in the pellet stove market. Whether for heating a large living area or creating a cozy atmosphere, the 5660(I) is a dependable choice.