Trouble Shooting ‐ | United States Stove 5660(I) manual

TROUBLE SHOOTING ‐ continued

The auger motor does not function normally.

If the auger shaft does not turn but the motors armature tries to spin then this is a sign your auger is jammed. Try to remove the blockage by poking at the fuel in the drop tube. If this does not work then empty the hopper and remove the auger cover and clear the blockage (Note: Before removing the auger cover disconnect power to the unit).

Make sure the hopper lip is fully closed to engage the hopper lip interlock.

Check for voltage at the auger motor, if none check circuit board fuse. Replace blown fuse with 1 amp fuse.

Ensure the exhaust blower is operating.

Check the vacuum hose is connected or damaged.

Bypass the vacuum switch by placing a jumper wire on the two electrical connections. If the auger motor starts to function normally replace the vacuum switch.

Check the manual reset on the 200° F high limit switch. If the switch has been tripped, check for the cause of the overheating, reset the switch and check if the auger operates normally.

Bypass the 200° F high switch by placing a jumper wire on the two electrical connections. If the auger motor starts to function normally replace the high limit switch.

If the auger is not jammed and you have tried the other possible causes, connect 120 volts directly to the auger motor. If the auger motor does not work replace the auger motor.

The 200oF High‐limit switch has tripped.

Reset the switch and determine the cause. It is normally a faulty circulation fan. If the circulation fan does not operate apply 120 volts directly to the circulation fan, if it still does not operate replace the circulation fan.

Heater will not shut off.

If room thermostat is used, make sure it is turned down below the room temperature

Disconnect one of the wires to the exhaust temperature sensor, the heater should then shut off; replace sensor

Depress the ON/OFF button to "OFF". If the heater will still not shut off, disconnect power to the unit and call your local dealer for service.

Heater Flame keeps going out on "LOW" setting.

If the flame goes out and leaves fresh unburned pellets in the burn pot liner then the fire is going out before the unit shuts off.

On the control panel, use HEAT button to turn the heat level up to the next setting, poorer quality pellets require a slightly higher setting.

If it is on heat level 1, you may also adjust the fuel feeding rate slightly by pressing the Auger Trim button.

5660(I) specifications

The United States Stove 5660(I) is a powerful pellet stove designed to provide efficient heating while boasting modern features and a user-friendly interface. Known for its high performance and reliability, this stove is a popular choice for homeowners seeking an effective heating solution for their living spaces.

One of the standout features of the 5660(I) is its capacity to produce up to 50,000 BTUs, making it suitable for heating areas up to approximately 2,500 square feet. This impressive heating capacity ensures that even larger rooms can be warmed quickly and efficiently, contributing to energy savings and comfort during the colder months.

The stove operates primarily on wood pellets, which are an environmentally friendly fuel choice. Wood pellets are made from compressed sawdust and provide a renewable heating source that burns cleanly and efficiently. The use of pellets not only minimizes emissions but also allows the stove to deliver consistent heat output.

In terms of technology, the United States Stove 5660(I) incorporates advanced features to enhance user experience. The stove is equipped with a digital control panel, offering easy programming options for both heating schedules and temperature settings. This digital interface allows homeowners to customize heating preferences, ensuring a comfortable atmosphere without excessive manual adjustments.

Another notable characteristic of the 5660(I) is its large hopper capacity, holding up to 60 pounds of pellets. This feature extends the time between refueling sessions, allowing for more extended periods of operation without interruption. The stove also features an automatic ignition system, simplifying the startup process and making it convenient for users.

The design of the 5660(I) is not just about functionality; it also boasts an aesthetic appeal. With its sleek and contemporary look, it can seamlessly integrate into various home decors. The stove comes in multiple finishes, allowing homeowners to choose a model that best matches their style.

Safety is also a priority with the United States Stove 5660(I). The unit includes various safety features, including an automatic shut-off function in case of a malfunction, ensuring peace of mind while the stove is in use. The high-efficiency burn system minimizes the amount of ash produced, making maintenance less of a chore.

In summary, the United States Stove 5660(I) combines performance, efficiency, and aesthetic appeal, presenting an excellent heating solution for any home. Its advanced features, ease of use, and eco-friendly fuel choice make it a top contender in the pellet stove market. Whether for heating a large living area or creating a cozy atmosphere, the 5660(I) is a dependable choice.