HP 3522, 3526 manual Status lights, How do I? Instructions

You can use the printer display to retrieve information about your wireless network, establish a wireless connection, and more.

How do I?	Instructions
Print network configuration page.	1.	Press the Wireless button to access the
The network configuration page will display the network status,		Wireless Settings menu.
	2.	Select Print Report, and then select
hostname, network name, and more.
		Configuration Page.
Print wireless network test report.	1.	Press the Wireless button to access the
The wireless network test report will display the diagnostics results for		Wireless Settings menu.
	2.	Select Print Report, and then select Test
the status of the wireless network, wireless signal strength, detected
networks, and more.		Report.
Restore network settings to default settings.	1.	Press the Wireless button to access the
		Wireless Settings menu.
	2.	Select Restore to Default.
	3.	Confirm selection to restore defaults.
Turn wireless on or off.	1.	Press the Wireless button to access the
		Wireless Settings menu.
	2.	Select Wireless.
	3.	From the Wireless On/Off menu select On
		or Off.
Establish a Wi-Fi Protected Setup (WPS) connection.	WiFi Protected Setup (WPS – requires WPS
	router)

Status lights

•Wireless status light

•On button light

Wireless status light

Light behavior

Off

Slow blinking

Fast blinking

On

Solution

Wireless is off. Press Wireless button to access wireless menu on the printer display. Use wireless menu to enable wireless printing.

Wireless is on but not connected to a network. If connection cannot be established, make sure printer is within range of wireless signal.

Wireless error has occurred. Refer to messages on printer display.

Wireless connection has been established and you can print.

On button light

Light behavior

Off

Solution

The printer is powered off.

Status lights 7