HP c7000 manual Removal and replacement procedures

Page 28

WARNING: To reduce the risk of personal injury or equipment damage when unloading a rack:

•At least two people are needed to safely unload the rack from the pallet. An empty 42U rack can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and may become unstable when being moved on its casters.

•Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle the rack from both sides.

WARNING: The enclosure is very heavy. To reduce the risk of personal injury or damage to the equipment:

•Observe local occupational health and safety requirements and guidelines for manual material handling.

•Remove all installed enclosure components from their enclosures before installing or moving the enclosures.

•Use caution and get help to lift and stabilize enclosures during installation or removal, especially when the enclosure is not fastened to the rack.

WARNING: To reduce the risk of personal injury or damage to the equipment in a rack-free environment:

•Never stack an enclosure on top of another enclosure.

•Never place equipment on top of an enclosure.

•Never place an enclosure on a surface that cannot support up to 217.7 kg (480.0 lb).

WARNING: To reduce the risk of personal injury or damage to the equipment, you must adequately support enclosures during installation and removal.

WARNING: Always use at least two people to lift an enclosure into the rack. If the enclosure is being loaded into the rack above chest level, a third person must assist with aligning the enclosure with the rails while the other two people support the weight of the enclosure.

WARNING: Before installing an enclosure in the rack, be sure that all hot-plug power supplies, server blades, and interconnects are removed from the enclosure. Blanks can be left in the enclosure.

WARNING: Be sure to install enclosures starting from the bottom of the rack and work your way up the rack.

Removal and replacement procedures 28

Image 28

Contents HP BladeSystem c7000 Enclosure Maintenance and Service Guide Audience assumptions Contents Acronyms and abbreviations Index Customer self repair Parts only warranty serviceRéparation par le client CSR Service de garantie pièces seules Riparazione da parte del clienteServizio di garanzia per i soli componenti Reparaciones del propio cliente Servicio de garantía exclusivo de componentes Garantieservice Parts Only Reparo feito pelo clienteServiço de garantia apenas para peças Customer self repair Customer self repair Customer self repair Customer self repair Illustrated parts catalog Mechanical componentsDescription Spare part number Customer self repair on Page Illustrated parts catalog System components Front system componentsPage Page Rear system components HP 1Gb Ethernet Pass-Thru Module for Page Illustrated parts catalog Removal and replacement procedures Safety considerationsRequired tools Preventing electrostatic dischargeRemoval and replacement procedures Power down the server blade Power down the enclosure HP BladeSystem c7000 power supply or power supply blankDevice bay blank Device bay shelf Half-height or full-height blade HP BladeSystem Insight Display Removal and replacement procedures Fan blank Active Cool fan Interconnect blankInterconnect switch or Pass-Thru module Interconnect bay dividers Onboard Administrator blank Onboard Administrator Onboard Administrator trayAC input module Rear cage Removal and replacement procedures Insight Display front-to-rear interconnect board Removal and replacement procedures Insight Display signal pass-thru board Removal and replacement procedures Midplane assembly Removal and replacement procedures Single-phase AC configuration Three-phase AC configuration CablingOnboard Administrator cabling Connector DescriptionDiagnostic tools Troubleshooting resourcesServer blade diagnostic tools HP Insight DiagnosticsHP Insight Diagnostics survey functionality Integrated Management LogFor more information on ISEE, refer to the HP website Enclosure front components Component identificationDevice bay numbering Component identification Power supply LEDs Power supply bay numberingHP BladeSystem Insight Display Insight Display overviewEnclosure rear components HP BladeSystem Insight Display componentsInterconnect module bay numbering Onboard Administrator components Onboard Administrator LEDs and buttons Fan bay numberingFan LED LED color Fan statusEnvironmental specifications SpecificationsEnclosure specifications Single-phase power Power specificationsThree-phase power North America/Japan Three-phase power International Acronyms and abbreviations SFP Index Static electricity System components