User’s Manual DRF Series
INDEX |
|
GENERAL INFORMATION | 4 |
QUICKGUIDE | 5 |
POWER SUPPLY CONNECTIONS | 5 |
SIGNALADJUSTMENT | 6 and 7 |
DIMENSIONS AND CONNECTIONS | 8 |
TECHNICALDATA | 9 |
INPUTSIGNAL | 9 |
OUTPUTSIGNAL | 9 |
POWER SUPPLY | 9 |
MECHANICAL DIMENSIONS | 9 |
GALVANIC ISOLATION LEVELS | 9 |
GENERALSPECIFICATIONS | 9 |
MATERIALS | 9 |
CAUTIONS, WARNINGS AND NOTES | 10 |
SAFETYCONSIDERATIONS PRESCRIPTION.- Before starting any
operation of adjustment,
r e p l a c e m e n t , maintenance or repair, the
unit must be disconnected from any kind of power supply. Keep the unit clean, to assure good functioning and per- formance. To prevent electrical or fire hazard, do not expose the unit to excessive
moisture. Do not operate the unit in the presence of flammable gases or fumes,
such an environment definetely constitutes a safety hazard. The unit is designed to be mounted on a metal panel.
If the unit shows signs of damage, is not able to show the expected measures, has
been stored in a bad conditions or a protection failure happened, then do not attempt to operate, keep the unit out of service and send for repair.
INCASEOFFIRE
1.- Disconnect the unit from the power supply
2.- Give the alarm according to the local rules
3.- Switch off all air conditioning devices
4.- Attack the fire with carbonic snow, do not use water in any case
WARNING: In closed areas |
do not use systems with |
vaporized liquids. |
Page 3