HP LE1852ms 18.5-inch manual

Page 16

2.Attach the mounting bracket to the Thin Client using the 4 screws to mount the bracket to the VESA mounting holes on the Thin Client.

Figure 2-11Mounting Quick Release and Quick Release Bracket to the Monitor and the Thin Client

3.Mount the Thin Client onto the Quick Release on the monitor. Figure 2-12Mounting the Thin Client onto the Quick Release

4.Plug one end of the short power cable (provided) into the power adapter (1) and the other end into the AC power connector on the monitor (2).

5.Connect the DC power cable from the power adaptor into the Thin Client (3).

6.Plug one end of the short VGA cable into the monitor (4) and the other end into the Thin Client

(5).

10 Chapter 2 Setting Up the Monitor

Image 16

Contents HP Compaq LE1852ms LED Backlit LCD Monitor First Edition September Document Part Number About This Guide Iv About This Guide Table of contents Page Product Features HP LCD MonitorSetting Up the Monitor Attaching the Monitor BaseRear Components Component FunctionFront Panel Controls 1Monitor Front Panel ControlsAdjusting the Monitor Removing the Monitor Pedestal BaseMounting the Monitor Mounting the MultiSeat Solution to the Monitor 9Connecting the VGA Signal Cable Setting Up the Monitor Page Page Page 14Securing the Thin Client Power Adapter Turning on the MonitorInstalling a Cable Lock 15Installing a Cable LockReference Guide Finding More InformationProduct Support Specifications Technical SpecificationsRecognizing Preset Display Resolutions Energy Saver Feature Entering User Modes