HP LE1852ms 18.5-inch manual Mounting the MultiSeat Solution to the Monitor

Page 13

2.To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor.

Figure 2-6Mounting the Monitor

To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.

3.Reconnect the cables to the monitor panel.

Mounting the MultiSeat Solution to the Monitor

You can attach an HP t150 or HP t200 Zero Client for MultiSeat to the rear of the monitor.

1.Mount the t150/t200 bracket to the VESA mounting holes on the back of the monitor using the four mounting screws provided.

Figure 2-7Installing the t150/t200 Bracket

Mounting the MultiSeat Solution to the Monitor

7

Image 13

Contents HP Compaq LE1852ms LED Backlit LCD Monitor First Edition September Document Part Number About This Guide Iv About This Guide Table of contents Page HP LCD Monitor Product FeaturesAttaching the Monitor Base Setting Up the MonitorComponent Function Rear Components1Monitor Front Panel Controls Front Panel ControlsRemoving the Monitor Pedestal Base Adjusting the MonitorMounting the Monitor Mounting the MultiSeat Solution to the Monitor 9Connecting the VGA Signal Cable Setting Up the Monitor Page Page Page Turning on the Monitor 14Securing the Thin Client Power Adapter15Installing a Cable Lock Installing a Cable LockReference Guide Finding More InformationProduct Support Specifications Technical SpecificationsRecognizing Preset Display Resolutions Entering User Modes Energy Saver Feature