BENDIX TABS-6 TRAILER ABS MODULE manual J1587 Diagnostic, J1587 J1587 SID FMI

Page 12

Diagnostic Trouble Codes (DTCs) (continued)

1st

2nd

Fault Description

 

 

Repair Information

Digit

Digit

 

 

 

 

 

 

 

 

 

J1587 Diagnostic

 

 

 

 

J1587 J1587 (SID) (FMI)

12

1 J1587 diagnostics shorted or open

• Check for corroded/damaged wiring or connectors

 

between the ECU and J1587 Diagnostic.

 

• Verify the following:

 

- At the 18-pin ECU harness connector:

 

(a) Continuity of the J1587 Diagnostic wiring to the

 

lamp (auxiliary device).

 

(b) +12V is not measured at J1587 Diagnostic lead.

 

- At J1587 Diagnostic connector:

 

(a) No continuity of the J1587 Diagnostic lead to

 

ground.

 

(b) No continuity from J1587 Diagnostic lead to any

 

other ECU pin(s).

 

(c) Replace/repair J1587 Diagnostic wiring or

 

components as required.

Trailer-Mounted ABS Indicator Lamp

2503, 4, 5 or 12

13

1 ABS lamp shorted or open

Check for corroded/damaged wiring or connectors between the ECU and ABS Indicator Lamp.

Verify the following:

-At the 5-pin or 18-pin ECU harness connector:

(a)Continuity of the ABS Indicator Lamp wiring to the lamp (auxiliary device).

(b)+12V is not measured at ABS Indicator Lamp lead.

-At ABS Indicator Lamp connector:

(a)No continuity of the ABS Indicator Lamp lead to ground.

(b)No continuity from ABS Indicator Lamp lead to any other ECU pin(s).

(c)Replace/repair ABS Indicator Lamp wiring or components as required.

813, 4, 5 or 12

12

Image 12
Contents SD-13-4767 IntroductionMounting configurations Power Line carrier plc CommunicationsComponents Pigtail Wiring HARNESSes ECU ConnectorsPower and Ground ABS Indicator LampBendix WS-24Wheel Speed Sensors Bendix BR9235 ABS Modulator Relay ValvesJ1708/J1587 Diagnostic Link POWER-UP SequenceAuxiliary I/O ABs Flex ProgramABS System Status Indicators ABS OperationAUTO-CONFIGURATION Diagnostic trouble code DetectionOdometer Function NON-STANDARD Tire SizeBlink Code Diagnostics Partial ABS ShutdownDisplay Configuration Resetting ABS Configuration1st 2nd Fault Description Repair Information J1587 Display Odometer MileageFault Description Repair Information J1587 Diagnostic Trailer-Mounted ABS Indicator LampJ1587 J1587 SID FMI Using hand-held or pc-based diagnostics Bendix Trdu Trailer Remote Diagnostic Unit ToolBendix ACom Diagnostic Software Features of the Bendix Trdu ToolBendix Trdu Tool Reset Function PLC Diagnostic ToolMpsi Bendix Cartridge How the Bendix Trdu Tool OperatesService Replacement of Other ABS Controllers Reinstallation of the TABS-6 moduleServicing the TABS-6 Module Removing the TABS-6 moduleABS Wiring Leakage and Operational TestsTroubleshooting Electrical Schematics Troubleshooting System Schematics 2S/2M Side Control 4S/2M Side Control 4S/3M SIDE/AXLE Control Troubleshooting Flowcharts ABS Indicator Lamp CircuitryPage Section B Power-Up Sequence Dash-Mounted ABS Indicator Lamp To Read/Clear Diagnostic Troubleshooting Codes DTCs Section D Diagnostic Trouble Code DTC PowerTrdu tool LED Quick Reference ABS Modulator DTCPage Section F Troubleshooting Power Supply Section G Troubleshooting the WS-24WHEEL Speed Sensors WSS SR SensorSL Sensor Section H Troubleshooting Modulator Relay Valves ECU Part Number Label Software Revision LevelDocument Revision Level