TRDU™ Tool
to Trailer | to Towing |
Connector | Vehicle |
| J560 |
| Connector |
Adapter
FIGURE 17 - TRDU™ tool and adapter
How the Bendix® TRDU™ Tool Operates
When the TRDU™ tool is plugged into the adapter, and the adapter/TRDU™ tool is installed between the trailer connector and the J560 connector of the towing vehicle, all the LEDs will illuminate, and the green LED will flash 4 times to indicate communications have been established.
If the ABS ECU has no active Diagnostic Trouble Codes, only the green LED will remain illuminated.
If the ABS ECU has at least one active Diagnostic Trouble Code the TRDU™ tool displays the first diagnostic trouble code by illuminating the red LEDs, indicating the malfunctioning ABS component and its location on the vehicle. (See Figure 18.) If there are multiple diagnostic trouble codes on the ABS system, the TRDU™ tool will display one diagnostic trouble code first, then once that Diagnostic Trouble Code has been repaired and cleared, the next code will be displayed.
The TRDU™ tool repeatedly blinks out the mileage stored once communications have been established. By counting the sequence of blinks and/or strobes on the blue LED the odometer reading is given. See page 10 for more details.
•VLT (Flashing indicates either over- or
To pinpoint the root cause and to ensure the system diagnostic trouble code is properly corrected the first time, additional troubleshooting may be necessary.
Bendix® TRDU™ Tool Reset Function
The magnetic reset switch is located by the letter "B" in the Bendix logo on the top of the TRDU™ tool. Activation requires a magnet with 30 gauss minimum.
The reset operations are:
1.If the magnet is held over the switch for less than 6 seconds the "clear diagnostic trouble codes" command is sent.
2.If the magnet is held over the switch for more than 6 seconds, but less than 11 seconds, the Bendix® ABS
Additionally, it is recommended at the end of any inspection that the user switches off and restores the power to the ABS ECU, then check the ABS Indicator Lamp operation and TRDU™ tool to see if they indicate any remaining Diagnostic Trouble Codes.
MPSI Bendix Cartridge
MPSI provides a Bendix cartridge for use with the Pro- Link™ tool. For more information on the Bendix diagnostic cartridge from MPSI, contact Bendix or refer to your local authorized Bendix parts outlet.
PLC Diagnostic Tool
Diagnostic tools are available that detect the presence of a PLC signal and perform further system diagnostics directly on the power line. For more information on these diagnostic tools, contact Bendix or refer to your local authorized Bendix parts outlet.
Heavy Duty | PC Card MPSI | |
Multi Protocol | ||
| Cartridge | Part Number |
|
| 805013 |
FIGURE 18 - TRDU™tool LED Locations
14
FIGURE 19 - nExIQ (MPSI) pro-link tool
CONTACTING BENDIX
www.Bendix.com
The Bendix
The Bendix