ASRock 980DE3/U3S3 manual Serial ATA Sata Data Cable

Page 21

Serial ATA (SATA)

Data Cable

(Optional)

USB 2.0 Headers

(9-pin USB4_5)

(see p.12 No. 22)

(9-pin USB6_7)

(see p.12 No. 21)

(9-pin USB8_9)	USB_PWR
(9-pin USB8_9)	P-9
(see p.12 No. 23)	P+9
(see p.12 No. 23)	GND
	DUMMY
	1
	GND
	P+8
	P-8
	USB_PWR

Infrared Module Header

(5-pin IR1)

(see p.12 No. 31)

	Internal Audio Connectors
	(4-pin CD1)	CD1
	(CD1: see p.12 No. 28)	CD1
	(CD1: see p.12 No. 28)
	CD-R	CD-L GND GND
	Front Panel Audio Header	GND
	(9-pin HD_AUDIO1)	PRESENCE#
	(9-pin HD_AUDIO1)	MIC_RET

OUT_RET

(see p.12 No. 29)

1

OUT2_L

J_SENSE

OUT2_R

MIC2_R MIC2_L

Either end of the SATA data cable can be connected to the SATA / SATA2 / SATA3 hard disk or the SATA3 connector on this motherboard.

Besides four default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports.

This header supports an optional wireless transmitting and receiving infrared module.

This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card.

This is an interface for the front panel audio cable that allows convenient connection and control of audio devices.

21

Image 21

Contents

980DE3/U3S3 Disclaimer Copyright NoticeContents Bios Setup Utility Introduction Package ContentsSpecifications USB ConnectorSupport CD HardwareFCC, CE, Whql CertificationsASRock Instant Boot Unique FeaturesASRock OC Tuner ASRock Intelligent Energy SaverASRock APP Charger ASRock OC DNAASRock XFast USB ASRock XFast LANASRock X-Boost ASRock XFast RAMMotherboard Layout LAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmNotch break Break Installing a DimmInstalling an expansion card Expansion Slots PCI and PCI Express SlotsPcie Slots Description Jumpers SetupSATAII6 Onboard Headers and ConnectorsSerial ATA Sata Data Cable System Panel Header CPU Fan Connectors ATX 12V Power Connector ATX Power ConnectorWhat is Hot Plug Function? What is Hot Swap Function?Hot Plug and Hot Swap Functions for SATA2 / SATA3 HDDs Points of attention, before you process the Hot Plug Sata / SATA2 / SATA3 HDD Hot Plug Feature Operation GuideHow to Hot Unplug a Sata / SATA2 / SATA3 HDD How to Hot Plug a Sata / SATA2 / SATA3 HDDInstalling Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Bios Make a Sata / SATA2 Driver DisketteUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Introduction Bios Menu BarMain Screen Navigation KeysTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondOC Tweaker Screen Processor Maximum Frequency AMD C-State SupportNorth Bridge Maximum Frequency Processor Maximum VoltageMemory Timing Power Down Enable Memory Configuration Memory ClockHT Bus Width Dram FrequencyChipset Settings NB Voltage Command Rate+1.8V Power Voltage Would you like to save current setting user defaults?Instant Flash Advanced ScreenCool ‘n’ Quiet CPU ConfigurationSecure Virtual Machine Enhance Halt State C1EOnboard HD Audio Chipset ConfigurationFront Panel Onboard LanAcpi Configuration Acpi Hpet table Sata Operation Mode Storage ConfigurationSata IDE Combined Mode Onboard SATA3 Operation ModePCIPnP Configuration PCI Latency TimerPCI IDE BusMaster Floppy Configuration Super IO Configuration USB Configuration CPU Fan Setting Chassis Fan 1 SettingHardware Health Event Monitoring Screen Boot Settings Configuration Boot ScreenSecurity Screen Exit Screen Support CD Information Install Operating SystemRunning The Support CD Drivers Menu

Related manuals

Manual 52 pages 35.35 Kb