ASRock C216 WS manual USB 3.0 Header

Page 33

USB 3.0 Header

(19-pin USB3_6_7) (see p.11, No. 8)

Vbus

IntA_P6_SSRX-

IntA_P6_SSRX+

GND

IntA_P6_SSTX-

IntA_P6_SSTX+

GND

IntA_P6_D-

IntA_P6_D+

Vbus

IntA_P7_SSRX- IntA_P7_SSRX+

GND

IntA_P7_SSTX- IntA_P7_SSTX+

GND

IntA_P7_D-

IntA_P7_D+

DUMMY

Besides six default USB 3.0 ports on the I/O panel, there is one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports.

Infrared Module Header

IRTX

(5-pin IR1)

+5VSB

DUMMY

(see p.11, No. 25)

1

 

 

GND

 

IRRX

This header supports an optional wireless transmitting and receiving infrared module.

Front Panel Audio Header

 

 

GND

(9-pin HD_AUDIO1)

 

 

 

 

PRESENCE#

 

 

 

 

 

 

MIC_RET

(see p.11, No. 27)

 

 

 

 

 

 

 

 

 

 

OUT_RET

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT2_L

 

 

 

 

 

 

 

 

J_SENSE

 

 

 

 

 

 

 

OUT2_R

 

 

 

 

 

MIC2_R

 

 

 

MIC2_L

This is an interface for front panel audio cable that allows convenient connection and control of audio devices.

1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2.If you use AC’97 audio panel, please install it to the front panel audio header as below:

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

E.To activate the front mic.

For Windows® 8 / 8 64-bit / 7 / 7 64-bit OS:

Go to the “FrontMic” Tab in the Realtek Control panel. Adjust “Recording Volume”.

33

Image 33
Contents C216 WS Disclaimer Copyright NoticeContents Troubleshooting Introduction Package ContentsSpecifications Audio StorageRear Panel I/O Bios Feature ConnectorUSB3.0 Support CDFCC, CE, Whql CertificationsUnique Features ASRock Crashless BiosASRock Instant Flash 24.4cm 9.6 Motherboard LayoutI/O Panel LAN Port LED IndicationsTable for Audio Output Connection Page Block Screw Holes Pre-installation PrecautionsCPU Installation Page Installation of CPU Fan and Heatsink Dual Channel Memory Configuration Installation of Memory Modules DimmInstalling a Dimm Expansion Slots PCI and PCI Express Slots Installing an expansion card Page CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards For Windows 8 / 7 OS Driver Installation and SetupPage Surround Display Feature For Windows 8 / 8 64-bit / 7 / 7 64-bit OS Hdcp Function What is HDCP?Description Jumpers SetupOnboard Headers and Connectors USB 3.0 Header System Panel Header Supply to this connector ATX Power ConnectorPlease connect an ATX 12V power supply to this connector ATX 12V Power ConnectorStatus Code Description 11 Dr. DebugTeaming Function Operation Guide Click Expert ModePage Page From Control Panel, double-clickNetwork Connections Uefi Menu Bar IntroductionMain Screen Navigation KeysNavigation Keys + / Tab Enter Pgup Pgdn Home F10 F12OC Tweaker Screen Dram Timing Configuration Dram Frequency Short Duration Power LimitDram Configuration Dram tCL Primary Plane Current LimitDram tRAS Command Rate CRDram tWR Dram tRFCMRC Fast Boot Dram Clock DelayDimm Exit Mode Power Down ModeCPU Load-Line Calibration Voltage Configuration CPU VoltageIgpu Voltage Igpu Load-Line CalibrationAdvanced Screen CPU Configuration Intel Virtualization Technology Hardware PrefetcherAdjacent Cache Line Prefetch North Bridge Configuration South Bridge Configuration Storage Configuration Page Serial Port Super IO ConfigurationSerial Port Address Infrared PortAcpi Configuration CSM USB 2.0 Controller USB ConfigurationUSB 3.0 Controller Legacy USB SupportTool Uefi Update Utility Instant FlashHardware Health Event Monitoring Screen Fast Boot Boot ScreenBoot From Onboard LAN Setup Prompt TimeoutBoot Failure Guard Count Boot Failure GuardFull Screen Logo AddOn ROM DisplaySecurity Screen Secure BootExit Screen Support CD Information Install Operating SystemRunning The Support CD Drivers MenuIf there is no power Troubleshooting ProceduresIf there are memory errors Unable to save system setup configurationsOther problems Returning Merchandise for Service Technical Support Procedures

C216 WS specifications

The ASRock C216 WS motherboard is designed for professionals and businesses seeking reliable performance and advanced features for their workstation systems. With its support for Intel's 4th generation Core processors and Xeon E3 series, the C216 WS provides a powerful platform for demanding applications, including content creation, data analysis, and intensive multitasking.

One of the standout features of the ASRock C216 WS is its dual-channel memory support, accommodating up to 32GB of DDR3 ECC and non-ECC memory. This capability enhances system stability and data integrity, making it particularly well-suited for mission-critical tasks. The motherboard features four DIMM slots, allowing users to take advantage of higher memory bandwidth for improved performance in memory-intensive applications.

In terms of connectivity, the C216 WS is equipped with multiple PCIe slots, allowing for the expansion of graphics cards, storage devices, and other peripherals. It features one PCIe 3.0 x16 slot, one PCIe 2.0 x16 slot, and two PCIe 2.0 x1 slots, providing flexibility for customization. Additionally, users can benefit from integrated graphics support with Intel's processors, enabling a more cost-effective solution for graphics rendering without the need for a dedicated GPU.

Storage options on the ASRock C216 WS are extensive, with six SATA3 ports supporting RAID configurations, including RAID 0, RAID 1, RAID 5, and RAID 10. This feature allows businesses to implement robust data redundancy and performance optimization strategies. Furthermore, the motherboard offers M.2 support, enabling faster solid-state drives for improved data access speeds.

The ASRock C216 WS also incorporates a range of advanced technologies for enhanced productivity and efficiency. Its integrated Intel IO Controller offers high-speed USB 3.0 ports, ensuring swift data transfer rates for external devices. Additionally, the motherboard includes Realtek ALC662 HD audio, providing high-definition sound quality for multimedia applications.

For enhanced durability and long-term reliability, the ASRock C216 WS is built with premium capacitors and a sturdy power design, ensuring stable power delivery even under heavy workloads. Its comprehensive thermal management solutions, including multiple fan headers, help maintain optimal operating temperatures, contributing to the overall longevity of the components.

In summary, the ASRock C216 WS is a feature-rich motherboard tailored for workstations that demand high performance and reliability. With its powerful processor support, extensive memory options, versatile expansion slots, and robust connectivity, it is an ideal choice for professionals looking to build a dependable workstation for intensive tasks.