ASRock C216 WS manual System Panel Header

Page 34

System Panel Header

This header accommodates

(9-pin PANEL1)

several system front panel

(see p.11, No. 18)

functions.

Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the sys- tem is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly.

Chassis Speaker Header

Please connect the chassis

(4-pin SPEAKER 1)

speaker to this header.

(see p.11, No. 17)

 

Power LED Header

(3-pin PLED1)

1

 

 

 

 

 

 

 

 

 

 

 

PLED-

(see p.11, No. 16)

 

 

 

PLED+

PLED+

Please connect the chassis power LED to this header to indicate system power status. The LED is on when the system is operating. The LED keeps blinking in S1/S3 state. The LED is off in S4 state or S5 state (power off).

34

Image 34
Contents C216 WS Copyright Notice DisclaimerContents Troubleshooting Package Contents IntroductionSpecifications Storage AudioRear Panel I/O USB3.0 ConnectorBios Feature Support CDCertifications FCC, CE, WhqlASRock Crashless Bios Unique FeaturesASRock Instant Flash Motherboard Layout 24.4cm 9.6LAN Port LED Indications I/O PanelTable for Audio Output Connection Page Block Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Dual Channel Memory ConfigurationInstalling a Dimm Expansion Slots PCI and PCI Express Slots Installing an expansion card Page CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards Driver Installation and Setup For Windows 8 / 7 OSPage Surround Display Feature For Windows 8 / 8 64-bit / 7 / 7 64-bit OS What is HDCP? Hdcp FunctionJumpers Setup DescriptionOnboard Headers and Connectors USB 3.0 Header System Panel Header ATX Power Connector Supply to this connectorATX 12V Power Connector Please connect an ATX 12V power supply to this connector11 Dr. Debug Status Code DescriptionClick Expert Mode Teaming Function Operation GuidePage Page From Control Panel, double-clickNetwork Connections Introduction Uefi Menu BarNavigation Keys + / Tab Enter Pgup Pgdn Home Navigation KeysMain Screen F10 F12OC Tweaker Screen Dram Configuration Dram tCL Short Duration Power LimitDram Timing Configuration Dram Frequency Primary Plane Current LimitDram tWR Command Rate CRDram tRAS Dram tRFCDimm Exit Mode Dram Clock DelayMRC Fast Boot Power Down ModeIgpu Voltage Voltage Configuration CPU VoltageCPU Load-Line Calibration Igpu Load-Line CalibrationAdvanced Screen CPU Configuration Hardware Prefetcher Intel Virtualization TechnologyAdjacent Cache Line Prefetch North Bridge Configuration South Bridge Configuration Storage Configuration Page Serial Port Address Super IO ConfigurationSerial Port Infrared PortAcpi Configuration CSM USB 3.0 Controller USB ConfigurationUSB 2.0 Controller Legacy USB SupportUefi Update Utility Instant Flash ToolHardware Health Event Monitoring Screen Boot From Onboard LAN Boot ScreenFast Boot Setup Prompt TimeoutFull Screen Logo Boot Failure GuardBoot Failure Guard Count AddOn ROM DisplaySecure Boot Security ScreenExit Screen Running The Support CD Install Operating SystemSupport CD Information Drivers MenuIf there are memory errors Troubleshooting ProceduresIf there is no power Unable to save system setup configurationsOther problems Technical Support Procedures Returning Merchandise for Service

C216 WS specifications

The ASRock C216 WS motherboard is designed for professionals and businesses seeking reliable performance and advanced features for their workstation systems. With its support for Intel's 4th generation Core processors and Xeon E3 series, the C216 WS provides a powerful platform for demanding applications, including content creation, data analysis, and intensive multitasking.

One of the standout features of the ASRock C216 WS is its dual-channel memory support, accommodating up to 32GB of DDR3 ECC and non-ECC memory. This capability enhances system stability and data integrity, making it particularly well-suited for mission-critical tasks. The motherboard features four DIMM slots, allowing users to take advantage of higher memory bandwidth for improved performance in memory-intensive applications.

In terms of connectivity, the C216 WS is equipped with multiple PCIe slots, allowing for the expansion of graphics cards, storage devices, and other peripherals. It features one PCIe 3.0 x16 slot, one PCIe 2.0 x16 slot, and two PCIe 2.0 x1 slots, providing flexibility for customization. Additionally, users can benefit from integrated graphics support with Intel's processors, enabling a more cost-effective solution for graphics rendering without the need for a dedicated GPU.

Storage options on the ASRock C216 WS are extensive, with six SATA3 ports supporting RAID configurations, including RAID 0, RAID 1, RAID 5, and RAID 10. This feature allows businesses to implement robust data redundancy and performance optimization strategies. Furthermore, the motherboard offers M.2 support, enabling faster solid-state drives for improved data access speeds.

The ASRock C216 WS also incorporates a range of advanced technologies for enhanced productivity and efficiency. Its integrated Intel IO Controller offers high-speed USB 3.0 ports, ensuring swift data transfer rates for external devices. Additionally, the motherboard includes Realtek ALC662 HD audio, providing high-definition sound quality for multimedia applications.

For enhanced durability and long-term reliability, the ASRock C216 WS is built with premium capacitors and a sturdy power design, ensuring stable power delivery even under heavy workloads. Its comprehensive thermal management solutions, including multiple fan headers, help maintain optimal operating temperatures, contributing to the overall longevity of the components.

In summary, the ASRock C216 WS is a feature-rich motherboard tailored for workstations that demand high performance and reliability. With its powerful processor support, extensive memory options, versatile expansion slots, and robust connectivity, it is an ideal choice for professionals looking to build a dependable workstation for intensive tasks.