ASRock 990FX Extreme4 manual Storage Configuration

Page 59

3.4.4 Storage Configuration

SATA Controller

This item is for SATA3_1 to SATA3_6 ports. Use this item to enable or dis- able the “SATA Controller” feature.

SATA Mode

This item is for SATA3_1 to SATA3_6 ports.Use this item to adjust SATA Mode. The default value of this option is [IDE Mode]. Configuration op- tions: [AHCI Mode], [RAID Mode] and [IDE Mode].

If you set this item to RAID mode, it is suggested to install

SATA ODD driver on SATA3_5 or SATA3_6 port.

SATA IDE Combined Mode

This item is for SATA3_5 and SATA3_6 ports. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled].

If you want to build RAID on SATA3_5 and SATA3_6 ports, please disable this item.

Marvell SATA3 Operation Mode

This item is for Marvell SATA3_7 and SATA3_8/eSATA3 ports. Use this item to adjust the “Marvell SATA3 Operation Mode” feature. Configuration options: [IDE Mode], [AHCI Mode] and [Disabled]. The default value is [IDE Mode].

Marvell SATA3 Bootable

Use this to enable or disable Onboard Marvell SATA3 Option ROM. If Option ROM is disabled, UEFI cannot use the SATA device to connect to

59

Image 59
Contents 990FX Extreme4 Disclaimer Copyright NoticeContents Super IO Configuration Acpi Configuration USB Configuration Install Operating SystemUefi Menu Bar CPU ConfigurationIntroduction Package ContentsSpecifications USB ConnectorSmart Switch Hardware Bios FeatureUnique Feature Support CDPage Page Page Designed in Taipei Motherboard LayoutTable for Audio Output Connection I/O PanelLAN Port LED Indications Page Pre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmInstalling a Dimm Pcie Slots Installing an expansion cardExpansion Slots PCI and PCI Express Slots Requirements Slitm and Quad Slitm Operation GuideDouble-click Nvidia Settings icon on your Windows taskbar Driver Installation and SetupFor Windows XP / XP 64-bit OS For Slitm mode only Select Control Panel tab Select Nvidia Control Panel tabPage CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards CrossFireTM Bridge For Windows 7 / VistaTM OS Install the required drivers to your systemFor Windows XP OS \ Surround Display Information Surround Display FeatureClear Cmos Jumper Jumpers SetupJumper Setting Onboard Headers and Connectors USB 2.0 Headers Serial ATA3 ConnectorsUSB 3.0 Header Besides two default USB Optional wireless transmittingFront Panel Audio Header Internal Audio Connectors This connector allows youCD-ROM, DVD-ROM, TV Tuner card, or Mpeg cardPower off Power LED Header Please connect the chassisPower LED to this header to Indicate system power statusPlease connect an ATX Power supply to this connector CPU Fan ConnectorsATX Power Connector ATX 12V Power ConnectorFront USB 3.0 Panel Installation Guide USB 3.0 Panel Rear USB 3.0 Bracket Installation GuideSmart Switches Status Code Description 11 Dr. DebugPage Page Page Hot Plug and Hot Swap Functions for SATA3 HDDs Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? What is Hot Swap Function?Points of attention, before you process the Hot Plug SATA3 HDD Hot Plug Feature and Operation GuideHow to Hot Plug a SATA3 HDD Make a SATA3 Driver Diskette Driver Installation GuideInstalling Windows XP / XP 64-bit With RAID Functions Set up UefiMake a SATA3 driver diskette by following .16.1 on Use RAID Installation Guide to set RAID configuration\ RAID Installation Guide Make a SATA3 Driver Diskette Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Uefi Menu Bar IntroductionSystem Time HourMinuteSecond Navigation KeysMain Screen To jump to the Exit Screen or exit the current screenOC Tweaker Screen HT Bus Width Dram Timing Control Power Down EnableMultiplier/Voltage Change HT Bus SpeedRAS to RAS Delay tRRD RAS# to CAS# Delay tRCDCommand Rate CR Write Recovery Time tWRCPU Load-line calibration Would you like to save current setting user defaults?NB Voltage HT VoltageInstant Flash Advanced ScreenEnhance Halt State C1E CPU ConfigurationCool ‘n’ Quiet Secure Virtual MachinePrimary Graphics Adapter North Bridge ConfigurationSouth Bridge Configuration Storage Configuration Hard Disk S.M.A.R.T Onboard IDE & 1394 ControllerSuper IO Configuration Acpi Configuration Acpi Hpet table USB Mouse Power OnLegacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 ControllerChassis Fan 3 Setting CPU Fan 1 & 2 SettingChassis Fan 1 Setting Chassis Fan 2 SettingBoot Screen Security Screen Exit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CDInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 281 pages 46.81 Kb