ASRock 990FX Extreme4 manual Acpi Configuration

Page 62

3.4.6 ACPI Configuration

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it.

Check Ready Bit

Use this item to enable or disable the feature Check Ready Bit.

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power re- covers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the power-soft-off mode.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

USB Keyboard/Remote Power On

Use this item to enable or disable the system to wake from S5 using USB Keyboard/Remote.

62

Image 62
Contents 990FX Extreme4 Copyright Notice DisclaimerContents CPU Configuration Install Operating SystemUefi Menu Bar Super IO Configuration Acpi Configuration USB ConfigurationPackage Contents IntroductionSpecifications USB ConnectorSmart Switch Support CD Bios FeatureUnique Feature HardwarePage Page Page Motherboard Layout Designed in TaipeiTable for Audio Output Connection I/O PanelLAN Port LED Indications Page Installation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Dual Channel Memory ConfigurationsInstalling a Dimm Pcie Slots Installing an expansion cardExpansion Slots PCI and PCI Express Slots Slitm and Quad Slitm Operation Guide RequirementsDouble-click Nvidia Settings icon on your Windows taskbar Driver Installation and SetupFor Windows XP / XP 64-bit OS For Slitm mode only Select Nvidia Control Panel tab Select Control Panel tabPage CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards CrossFireTM Bridge For Windows 7 / VistaTM OS Install the required drivers to your systemFor Windows XP OS Surround Display Feature \ Surround Display InformationClear Cmos Jumper Jumpers SetupJumper Setting Onboard Headers and Connectors Optional wireless transmitting Serial ATA3 ConnectorsUSB 3.0 Header Besides two default USB USB 2.0 HeadersTuner card, or Mpeg card Internal Audio Connectors This connector allows youCD-ROM, DVD-ROM, TV Front Panel Audio HeaderIndicate system power status Power LED Header Please connect the chassisPower LED to this header to Power offATX 12V Power Connector CPU Fan ConnectorsATX Power Connector Please connect an ATX Power supply to this connectorFront USB 3.0 Panel Installation Guide Rear USB 3.0 Bracket Installation Guide USB 3.0 PanelSmart Switches 11 Dr. Debug Status Code DescriptionPage Page Page What is Hot Swap Function? Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? Hot Plug and Hot Swap Functions for SATA3 HDDsSATA3 HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a SATA3 HDD Set up Uefi Driver Installation GuideInstalling Windows XP / XP 64-bit With RAID Functions Make a SATA3 Driver DisketteMake a SATA3 driver diskette by following .16.1 on Use RAID Installation Guide to set RAID configuration\ RAID Installation Guide Make a SATA3 Driver Diskette Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Introduction Uefi Menu BarTo jump to the Exit Screen or exit the current screen Navigation KeysMain Screen System Time HourMinuteSecondOC Tweaker Screen HT Bus Speed Dram Timing Control Power Down EnableMultiplier/Voltage Change HT Bus WidthWrite Recovery Time tWR RAS# to CAS# Delay tRCDCommand Rate CR RAS to RAS Delay tRRDHT Voltage Would you like to save current setting user defaults?NB Voltage CPU Load-line calibrationAdvanced Screen Instant FlashSecure Virtual Machine CPU ConfigurationCool ‘n’ Quiet Enhance Halt State C1ENorth Bridge Configuration Primary Graphics AdapterSouth Bridge Configuration Storage Configuration Onboard IDE & 1394 Controller Hard Disk S.M.A.R.TSuper IO Configuration Acpi Configuration USB Mouse Power On Acpi Hpet tableUSB 3.0 Controller USB ConfigurationUSB 2.0 Controller Legacy USB SupportChassis Fan 2 Setting CPU Fan 1 & 2 SettingChassis Fan 1 Setting Chassis Fan 3 SettingBoot Screen Security Screen Exit Screen Running The Support CD Install Operating SystemSupport CD Information Drivers MenuInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 281 pages 46.81 Kb