Initial set-up of your oven
Setting the time of day
oWhen the oven is connected to your mains supply for the first time (or after a power cut), the digits on the LED display (7) will show “0:00” and there will be an audible signal.
oPress the clock button (3) and the hour digits will flash on the LED display.
oTurn the adjustment knob (6) to adjust the hour time. Your oven has a 24 hour clock, so it is possible to adjust the hour digit between 0 and 23.
oWhen the correct hour time appears on the LED display, press the clock button again. The minute digits will flash on the LED display.
oTurn the adjustment knob to adjust the minute time; it is possible to adjust the minute digit between 0 and 59.
oWhen the correct minute time appears on the LED display, press the clock button for a third time to confirm the time of day.
oThe “:” symbol between the digits will flash and the time of day will light on the LED display.
IMPORTANT: You can adjust the time of day at any time by following the instructions above, as long as the oven is not currently in use.
Before first use
oTo remove any residue from the oven that may have been left from the manufacturing process, you should select the convection & fan oven function and set the thermostat to its maximum temperature setting.
oIt is perfectly normal for a smell to be produced during this process.
oYou should make sure that any windows in the room are left open during this process.
oIt is advisable for you not to remain in the room whilst the burning off process is taking place.
o You should leave the oven on maximum setting for 30 – 40 minutes.
oAfter the oven cavity has cooled, it should then be cleaned with warm soapy water, using either a sponge or soft cloth. No abrasive cleaners should be used.
11