Quick set up Before power is turned on

Quick set up - Before power is turned on.

1)Be sure the SLP5600 power supply and AC cord is correct for your region (120 Volt or 230 volt).

2)Use only a grounded (3 prong) power outlet to prevent a shock hazard. This also provides the qui- etest grounding for your mixer.

3)Zeroing the console knobs and switches insures the current status of your mixer and reduces sur- prises when initially plugging in instruments and microphones.

Zeroing procedure:

Channel - Turn all EQ gain controls to their center positions.

Turn the mic-pre gain controls to their full counter-clockwise position. Turn all auxiliary send controls counter-clockwise to “0”.

Place channel faders to the down position. Place all channel switches to the up position.

Master - Place all master and group faders to the down position. Turn all control room levels counter clockwise to “0”

Turn all Auxiliary send master levels counter clockwise to “0”. Turn all stereo return levels counter clockwise to “0”.

4)The SL mixer series uses an external power supply, the SLP5600. AC power is connected to the SLP5600 and is in turn connected to the mixer via a 4 wire Speakon™ cable. If an alternate Speakon™ cable is to be used, be sure it is a 4 wire cable. Not all Speakon™ cables have 4 wires.

5)After connecting your power supply and zeroing the console, turn on the mixer via the red power switch on the SLP5600 power supply. Test the mixer by plugging a microphone into a channel XLR input, turn up the gain control at the top of the channel and turn up the channels fader. While talking into the microphone, the channel meters should be showing signal. Some adjustment to the gain con- trol and fader may be needed to see the signal on the channel meters. Now assign the channel to any of the master groups or Left-Right via the channel assignment switches 1-2, 3-4, 5-6, 7-8, or L-R. After adjusting the corresponding master fader, the master meters should be showing signal.

This is a very simple turn on/setup procedure. However, be sure to read the entire manual. Note; some features or setup connections may help in your situation because most of the S/L console fea- tures are not clear cut Studio or Live functions.

Set your channel controls as shown.

GAIN			PHASE
			PHASE
5		55		TAPE
5		55
		0
-15		+15		LOW
HIGH				CUT
HIGH
		0
				HI
				MID
-15		+15
	1k
800		2k		FREQ
				FREQ
200		5k
		0
				LOW
				MID
-15		+15
	500
200		1k		FREQ
				FREQ
80		2k
LOW
		0
				EQ I N
-15		+15
	5			AUX
0	1 10			5
PRE
1-2
	5		0	2 10
			3
0		10		4
				5
PRE 3 - 4			0	10
	5		0	10
	5
			5
0		10		6
				5
TAPE 5 - 6			0	10
7/8			0	10
7/8		5		TAPE
		5		TAPE
0		10
	C
				PRE
				FAD
				w/EQ
7 PAN 8
		C
L		R	PK
PAN
		SOLO
		MUTE
		+12
		+9		SOLO
		+9
		+6		1-2
				1-2
		+3
				3-4
		0
		3		5-6
		6		7-8
				7-8
		12		L-R
				L-R
		18
		24
		30
		40
		50
		oo
				5

SL40C specifications

The Carvin SL40C is a cutting-edge guitar amplifier that showcases the innovative spirit of Carvin, a company known for its high-quality sound equipment. The SL40C is designed specifically for guitarists seeking a versatile and powerful amp that can meet the demands of various musical styles, from rock and blues to jazz and country.

At the heart of the SL40C is its all-tube design, which provides a warm, rich tone that digital amps often struggle to replicate. The amp features a 40-watt output, making it suitable for both practice sessions and live performances. One of the standout characteristics of the SL40C is its dual-channel configuration, allowing players to switch between clean and overdriven tones effortlessly. This feature enables guitarists to achieve a wide range of sounds, from pristine cleans to creamy distortion.

The amp is equipped with a 12-inch speaker that delivers a robust sound with clarity and depth. The cabinet is designed to enhance the tonal characteristics, providing a balanced response whether playing clean chords or heavy riffs. The SL40C also has built-in reverb, adding depth to the sound and allowing musicians to create a more ambient atmosphere during performances.

One of the key technologies incorporated in the SL40C is its unique tone shaping controls. The amp includes a three-band EQ (bass, middle, treble) that allows players to sculpt their sound to fit any musical style. Additionally, the presence control enhances high frequencies, giving players the ability to achieve a bright and cutting tone.

Another impressive aspect of the Carvin SL40C is its portability. Weighing in at a manageable level, the amp is easy to transport, making it a favorite among gigging musicians who require a reliable and powerful solution without compromising on sound quality.

Durability is also a top priority in the design of the SL40C. The rugged construction ensures it can withstand the rigors of travel and live performances, while the classic aesthetic appeals to players who appreciate a vintage look.

In conclusion, the Carvin SL40C shines as a versatile and powerful amplifier capable of delivering exceptional sound quality across various musical genres. Its all-tube design, dual-channel functionality, and effective tone-shaping controls make it an indispensable tool for guitarists looking to elevate their sound. Whether in the studio or on stage, the SL40C continues to impress with its rich tones and robust features.