Panasonic SC-BTT750 warranty Preparing the speakers, Assembling the speakers BTT750, Preparation

STEP 1 : Preparing the speakers

Assembling the speakers [BTT750]

Caution

≥Do not stand on the base. Be cautious when children are near.

≥When carrying speakers, hold the stand and base parts.

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For wall mount, refer to page 41.

≥Keep the screws out of reach of children to prevent swallowing.

2 Front speakers 2 Stands (with cables) 2 Bases 4 Screws A 2 Screws B

AB

1	Back of the base	Pull the cable
		straight along
		the line and
		slide into the
		groove.
		Screw A	Tighten
			securely.
2		Insert the wire fully.
		r: White
		s: Blue line
		Push!
		Press into the groove.
		Screw B
		Tighten securely.

Leave about 80 mm (3 5/32q)

2

1

∫Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg (22 lbs).











AString (not supplied)

Thread from the wall to the speaker and tie tightly.

BRear of the speaker

CScrew eye (not supplied) D Wall

E Approx.150 mm (5 29/32q)

VQT2W18

10