Carvin manual LC24 Rear Connections

Page 5

2

3

4

5

6

7

1

31

30

29

28

27

26

25

24

23

22

21

20

19

18

8

9

10

11

12

13

14

15

16

17

released the scene program is locked so that chase speed and other programs can be set to new chase speeds. To return a Scene program’s chase speed control to the speed fader, place the Speed fader in the bottom SHOW MODE position. Press and hold the REC SPEED button along with the Scene programs FLASH button upon release of both buttons the control is restored.

26.) DARK BUTTON

The DARK button is like a momentary version of the BLACKOUT button. Except the DARK button cannot be over ridden by any other button while still pressed.

27.) ALL REV BUTTON / EDIT

The ALL REV button works in the Scenes mode. It reverses the direction of the chase for all scene programs running whether or not a chase speed was set using the Rec Speed button. In record Mode and in Scene mode the alternate Edit function pressed in conjunction with a scene flash button puts the console in the edit mode of that scene program. See Record Mode.

28.) % OR 0-255 / INSERT BUTTON

The % OR 0-255button is used to change the dimmer read- out on the LED display from 0-100%to 0-255steps. This is only a display reading preference. The function toggles every time the RECORD and "% OR 0-255" buttons are press and the same time. The alternate Insert function works in the record Edit mode. It is used to insert a new step into an existing program.

29.) REV ONE / DELETE BUTTON

The REV ONE button reverses the scene program who’s FLASH button is pressed at the same time. The alternate Delete function works in the record Edit mode. It is used to delete a new step into an existing program.

30.) CHASE REV / UP BUTTON

The CHASE REV button works in the Scene mode and

reverses the chase direction of the any programs running to a chase speed it will not rev scene programs that have their chase speed set by using the REC SPEED button. The UP function works in the record Edit mode. It is used to change the dimmer intensity in an existing program. In the record Edit mode, a steps dimmer intensity value is changed by pressing and holding the UP button, then as the FLASH button under the channel to be modified is pressed the inten- sity is increased. The alternate Chase Rev function works in the Scene mode and reverses the chase direction of the any programs running to a chase speed it will not rev scene programs that have their chase speed set by using the REC SPEED button.

31.) BEAT REV / DOWN BUTTON

The BEAT REV button works in the Scene mode with scene programs that have their chase speed set by the REC SPEED button and are now running with other programs with audio chase activated. The Set Speed chase programs will reverse on the next beat (may have to hold the button for two beats) after the button is released.

The alternate Down function works in the record Edit mode. It is used to change the dimmer intensity value of a step in an existing program. In the record Edit mode, a step’s dimmer intensity value is change by pressing and holding the Down button, then as the Flash button under the channel to be mod- ified is pressed the intensity is decreased.

LC24 REAR CONNECTIONS

REAR PANEL CONTROLS:

32.) POWER INPUT JACK

Use supplied AC wall adapter.

33.) MIDI THRU

Use for serial connections of more MIDI devices connected after the LC24. Has same MIDI information as going into the MIDI in jack.

34.) MIDI OUT

Use for send out MIDI information from the LC24.

35.) MIDI IN

Used for receiving MIDI information into the LC24.

36.) DMX OUTPUT

Used for send information to Dimmer packs etc.. in the DMX- 512 format.

37.) DMX POLARITY SELECT

Reverses the polarity of the balanced DMX lines. Used if Dimmer packs etc.. used with the LC24 only conform to a certain polarity. See Dimmer pack and other peripherals for correct polarity. The polarity will not damage peripherals, but they may not function properly with an incorrect setting.

38.) THE AUDIO INPUT

The audio input jack when used turns off the internal micro- phone. I can handle from 100mV to 1V pp and is controlled by the audio fader. This jack is used to control the chase rate of a scene program with an audio source.

39.) REMOTE CONTROL INPUT:

The stereo (TRS) 1/4" jack is used to remotely control the Full On and Black Out features of the console. The tip is the Full On control. It works in either momentary hold or push on push off. The Ring is the Black Out control and works as push on / push off. This is the same are these switches work

on the front console.

32

33

34

35

36

37

38

39

Image 5
Contents Page Closed Loop Mode File Dump Connections Open Loop ModeMidi OUT Settings LC24 SpecificationsTo Enter Recording Mode Recording Mode FEATURES, HOW TO, and ExamplesRecording a Scene Program Playing a Scene Program with AN Audio ChaseChannel A’S 1-12 Faders Deleting ProgramsChannel 1-12 Flash Buttons Channel B’S 1-12 and A’S 13-24 Flash ButtonsLC24 Rear Connections

LC24 specifications

The Carvin LC24 is a premier electric guitar that showcases the brand's commitment to quality, craftsmanship, and innovation. Known for its versatility, the LC24 is designed to accommodate players across various music genres, making it a favorite among rock, metal, and blues guitarists. Its standout feature is the sleek double-cutaway solid body, providing a comfortable playing experience while enhancing tonal resonance.

One of the key features of the LC24 is its lightweight basswood body, which contributes to its incredible playability without sacrificing sound quality. The guitar’s modern contour allows for easy access to the upper frets, making it ideal for lead players and soloists. The LC24 comes equipped with a stunning quilted maple top, adding both aesthetic appeal and a bit of brightness to the overall tone.

The neck of the LC24 is a fast-playing maple construction, with a bolt-on design that allows for easy adjustments. It features a rosewood or maple fingerboard, depending on the model, with 24 extra-jumbo frets that provide ample space for intricate playing techniques. The guitar has a comfortable radius, facilitating both chords and solo work.

In terms of electronics, the LC24 is equipped with Carvin's proprietary pickups. The guitar typically features a pair of humbucking pickups that deliver a rich, full sound with impressive clarity. These pickups are designed to minimize feedback while offering robust tone options. The versatile four-way pickup selector allows players to easily switch between various tonal options, from warm, rounded tones to bright, cutting sounds.

The LC24 also includes high-quality hardware, including a Kahler-style tremolo system that allows for smooth pitch bending and expressive playing. This bridge system enhances sustain and stability, making it ideal for aggressive playing styles.

In addition to its impressive technical specifications, the Carvin LC24 is available in a variety of finishes and colors, allowing musicians to choose a look that reflects their personal style. It also comes with extensive customization options, enabling players to tailor the instrument to their preferences.

Overall, the Carvin LC24 stands out as a top-tier electric guitar, combining exceptional build quality with innovative features. Whether for studio work, live performances, or personal practice, the LC24 is a reliable companion that doesn’t compromise on sound or playability. Its balanced design and versatile electronics make it a valuable instrument for any guitarist's collection.