Panasonic SC-BTT490 owner manual Following Applies only in Canada

Page 51

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

Contains FCC ID: MCLT77H330 Contains IC:2878D-T77H330

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm (77/8q) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Trade Name: Panasonic

Model No.: SC-BTT490

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact:

Panasonic Consumer Marketing Company of North America

Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian ICES-003.

THE FOLLOWING APPLIES ONLY IN CANADA.

Product Identification Marking is located on the bottom of the unit.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Reference

VQT3X49 51

Image 51
Contents Model No. SC-BTT490 Speaker PlacementUnit Small objectTable of contents Package contents and accessories Unit and media care AccessoriesPlayable media Type Logo examples Type detail Playable contentsBD-Video Discs that cannot be played This unitRegion management information FinalizeTV operation buttons Remote controlUsing the remote control Control reference guideStandby/on switch Í/I Main unit FrontMain unit Rear Positioning Wireless connections SH-FX71Enjoy surround speaker sound wirelessly Upgrade to 7.1-channel systemTighten the 3 screws supplied securely Preparing the speakersAssembling the front speakers Attach the stand to the basePush Connecting the speaker cablesSpeaker cable sticker Connector Tighten the screw supplied securelySpeaker connection ConnectionsHdmi What is ARC?Connection to a TV TV AudioStandard picture and audio FM antenna connectionStandard picture and better audio Optical digital audio Cable not suppliedSet Top Box, etc When the connecting devices have an Hdmi terminalWhen the connecting devices do not have an Hdmi terminal Other device connectionConnecting to an AC power source Connection to the networkSet the voltage at the bottom of the main unit Settings Easy SettingEasy Network Setting Reprogramming the remote control Firmware updatesTo enter your network name Ssid manually Inserting or removing media Home menu Using facial recognition Multi User ModeSwitching the user Using colored buttonsOperations during playback PlaybackDisplaying menus and playback information Enjoying 3D video and photosEnjoying BD-Live Slideshow Using the iPod/iPhoneIPod/iPhone Playback IPod/iPhone ConnectionOnly when TV supports Hdavi Control 2 or later Automatic input switching Power on linkPower Off link Easy control only with Viera remote controlSelect the TV audio Connecting the Hdmi cableConnecting the optical digital audio cable Enjoying TV and STB with unit’s speakersManual tuning and presetting TY-CC10W Enjoying Network Service NETFLIX, etcHome Network feature Playing back contents on the Dlna serverUsing the Digital Media Controller Operation Menu Option menuPersonal Preference Video SettingsAudio Settings Setup menu 3D SettingsVideo ¾ DTS/DTS-HD Audio¾ PCM-FIX LanguageDST NetworkSystem RatingsAdjusting speaker level Speaker settingsSurround Effects Delay timeAdjusting speaker level during Play Delay time for the Surround and Surround back speakersSpeaker installation option Attaching to a wallDo not Reattaching the speaker cable to the stand Front speaker assembly optionPreventing the speakers from falling or dropping   Cannot eject disc Troubleshooting guideDo you have the latest firmware installed? General operationPicture Sound PlaybackIPod/iPhone operation Messages RadioOn the television On the unit’s display Center SpecificationsDisplay languages list Language code listSupplemental information File formatFollowing Applies only in Canada Page MS/WMA MS/PlayReady/Final Product Labeling3MS/PlayReady/End User Notices One Panasonic Way, Secaucus, New Jersey Limited WarrantyAmbler Drive, Mississauga, Ontario L4W 2T3 Limited Warranty Only for CanadaPlease locate your nearest Authorized Servicentre Panasonic Canada IncIndex DlnaLAN
Related manuals
Manual 56 pages 4.42 Kb

SC-BTT490 specifications

The Panasonic SC-BTT490 is a sophisticated home theater system that brings the cinematic experience right into your living room. This versatile system is designed to deliver premium audio and visual performance, making it an ideal choice for movie nights, gaming, and music streaming.

One of the standout features of the SC-BTT490 is its powerful 5.1-channel surround sound system. With a total output of 1000 watts, this setup provides an immersive audio experience that enhances every detail of your favorite movies and music. The system includes a subwoofer, which adds depth and richness to the sound, ensuring that you feel every beat and rumble.

The SC-BTT490 is equipped with Bluetooth technology, allowing for seamless wireless streaming from various devices such as smartphones, tablets, and laptops. This feature makes it easy to play music from your personal library or popular streaming services without the hassle of wires. In addition, the system supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that high-definition sound quality is maintained.

Panasonic has integrated various connectivity options into the SC-BTT490, including HDMI ports for easy connection to your television or other devices. The HDMI ARC (Audio Return Channel) feature simplifies the connection, allowing users to control both the TV and audio system with a single remote. This functionality enhances convenience and improves the overall user experience.

Another notable aspect of the SC-BTT490 is its built-in DVD player, which can play a variety of disc formats, including CDs and DVDs. The system includes an upscaling feature, enhancing the resolution of standard DVDs to near high definition for a better viewing experience.

Furthermore, the SC-BTT490 offers multiple sound modes, allowing users to customize the audio output to suit different types of content, from action-packed films to soft classical music. The dedicated audio settings help to optimize sound quality for an even more personalized experience.

Overall, the Panasonic SC-BTT490 is an all-in-one home theater solution that combines advanced audio technologies, user-friendly connectivity options, and versatile playback capabilities. Its impressive performance makes it a worthy addition to any entertainment setup, promising to elevate your viewing and listening experiences to new heights.