Chipset Configuration:
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Chipset Configuration |
|
|
| [ Setup Help ] | |
|
|
|
|
|
|
|
|
|
|
| <Enter> to select the |
AGP Aperture Size |
| 64MB |
| size of mapped memory | |
Onboard VGA Share Memory |
| Auto | for graphics data. | ||
USB Controller |
| Enabled |
| ||
USB Device Legacy Support |
| Disabled |
| ||
USB 2.0 Controller |
| Enabled |
| ||
DRAM CAS# Latency |
| Auto |
| ||
MA 1T/2T | Select |
| MA2T |
| |
Vccm Voltage |
| 2.62V |
| ||
Defer Function |
| Auto |
| ||
CPU Thermal Throttling |
| Enabled |
| ||
| Enabled |
| |||
AGP / PCI Fix Frequency |
| Sync. |
| ||
F1:Help | :Select Item | F9:Setup Defaults | |||
Esc:Previous Menu | Enter:Select | F10:Save & Exit | |||
|
|
| |||
AGP Aperture Size: It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless your AGP card requires other sizes.
OnBoard VGA Share Memory: This allows you to select the size of share memory for onboard VGA. Onboard VGA will get better resolution if larger size of share memory is selected.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable support to emulate legacy I/O devices such as mouse, keyboard,... etc.
USB 2.0 Controller: Use this to enable or disable the use of USB 2.0 controller.
DRAM CAS# Latency: This parameter controls the latency between the read command and the time the data available.
MA 1T/2T Select: Use this item to meet the timing and loading condition for optimized result of DRAM address/control signals. The default value of this item is [MA2T], and other configuration options are [Auto] and [MA1T].
Vccm Voltage: Use this to select VCCM voltage between [2.62V] and [2.55V].
Defer Function: It allows you to adjust defer function.The default setting is [Auto].
CPU Thermal Throttling: Select [Enabled] will enable P4 thermalcontrol cir cuit tokeep CPU from overheated.
2 4