Jabra C220 Using Your Device in a Vehicle, Using the Device Holder, Connecting the Car Charger

Page 12

1.3 Using Your Device in a Vehicle

1.3 Using Your Device in a Vehicle

Using the Device Holder

CAUTION:

zSelect an appropriate location for the device holder. Never place the holder where the driver’s field of vision is blocked.

zIf the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable

Use the device holder to fix your device in a vehicle. Make sure that the GPS antenna has a clear view of the sky.

Connecting the Car Charger

The car charger supplies power to your device when you are using the device in a car.

CAUTION: To protect your device against sudden surges in current, connect the car charger only after the car engine has been started.

1.Connect one end of the car charger to the power connector of your device.

2.Connect the other end to the cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power is being supplied to your device.

CAUTION: For optimal performance of the lithium battery, take note of the following:

6

Image 12

Contents Page Trademarks Table of Contents 2 Settings3 Troubleshooting and Maintenance 1 Getting Started4 Regulatory Information Warnings and Notices Do not place on the dashboard unsecured Do not mount in front of airbag panelsGetting Started 1.1 Understanding Hardware ComponentsFront Components ComponentBack Components Right-SideComponentsComponent DescriptionTop Components Bottom ComponentsConnects to stereo headphones Connector1.2 Performing the Initial Start Up Page 1.3 Using Your Device in a Vehicle Using the Device HolderConnecting the Car Charger 1.4 Operating Basics Turning On and OffNavigating on the Screen Home Screen zTapzDrag zTap and hold1.5 Inserting a SD/MMC Card zMake sure that no foreign objects enter the slotPage Settings 2.1 Starting and Exiting Settings2.2 Backlight 1.Tap the Settings button on the Home screen2.Tap the Backlight button 4. Tap to save the changes2.3 Volume 1.Tap the Settings button on the Home screen2.Tap the Volume button 4. Tap save the changes2.4 Screen 1.Tap the Settings button on the Home screen2.Tap the Screen button 3. Tap to start the calibration2.5 Power 2.6 Date&Time 1.Tap the Settings button on the Home screen4. Tap to save the changes 2.Tap the Date&Time button2.7 Change Language 4.Tap to save the changes Troubleshooting and Maintenance 3.1 Restart and Shut DownRestarting Your Device Shutting Down Your Device3.2 Troubleshooting Power ProblemsScreen Problems Connection ProblemsGPS Problems 3.3Maintaining Your DeviceDo not use paper towels to clean the screen Regulatory Information 4.1 Regulations StatementsClass B Regulations StatementEuropean Notice Canada Canadian Department Of CommunicationsPlease note 4.2 Safety Precautions EN60950 / IEC 60950 Product SafetyAbout Charging About the ChargerAbout the Battery