Using the Menu
5.3 Tracking
Horizontal
When the monitor is connected using VGA, press + to move the screen display area to the right or - to move left.
Vertical
When the monitor is connected using VGA, press + to move the screen display area up or - to move down.
Clock
Press +/- to adjust the Clock setting.
Phase
Press +/- to adjust the Phase setting.
Sharpness
Press +/- to adjust the display sharpness.
Sharpness can be adjusted from 0 to 10.
5.4 Setup
Language
Press UP and DOWN to select the language used in the Menu. The language updates immediately when selected.
OSD Position - Horizontal
Press + to move the Menu to the right or - to move left.
OSD Position - Vertical
Press + to move the Menu up or - to move down.
White Balance
Press +/- to turn the White Balance setting on or off.
DCR
Press +/- to turn the Dynamic Contrast Ratio setting on or off.
4:3 or Wide
Press +/- to select a widescreen or 4:3 aspect ratio.
Input Select
Press +/- to select HDMI or VGA inputs.
Factory Reset
Press + or - to reset the monitor to factory default settings. The settings change immediately.
7