Lorex 27[sy] LED monitor manual Maintenance, Technical Specifications

Page 21

Maintenance

7.Maintenance

Be sure to press POWER to power off the monitor and disconnect the power adapter before cleaning or moving the monitor.

Wipe the monitor with a dry, soft cloth.

If the monitor screen is very dirty, wipe clean with a cloth that has been dipped in a diluted soap-and-water solution and wrung out thoroughly. Then wipe again with a dry cloth.

Do not use alcohol, benzine, thinner, cleaning fluid, or other chemicals to clean the monitor.

Do not use compressed air to remove dust from the monitor.

When removing the monitor base, lay the monitor face down on a soft area to prevent it from getting scratched or damaged.

8.Technical Specifications

Display

27" TFT LED

Resolution

H: 1920 V: 1080

 

 

Dots Distance

0.31125(H) x 0.31125(V) mm

 

 

Visible Range

597.6(H) × 336.15(V) mm

 

 

Power Source

12V DC

 

 

Power Requirement

4A

 

 

Power Consumption

up to 48W

 

 

Operation Temperature

23° ~ 113°F

 

–5° ~ 45°C

 

 

Dimensions (including stand)

25.7" (L) x 18.1" (W) X 7.8" (D)

 

654mm (L) x 460mm (W) X 200mm (D)

 

 

Weight (approx.)

11lbs / 5kg

 

 

As our products are subject to continuous improvement, Lorex Technology Inc. and its subsidiaries reserve the right to modify product design, specifications, and prices without notice and without incurring any obligation. E&OE

9

Image 21
Contents TFT LED Monitor Risk of Electric Shock Do not Open Need HELP? ¿NECESITA AYUDA? Before YOU Start Avant DE Antes DE Commencer Empezar Important Safeguards Service Product Information Viii Table of Contents Page System comes with the following components Getting StartedTo install the monitor stand Installing the Monitor StandConnecting the Monitor Connect to DVR Using VGA Monitor Overview Picture Using the MenuTracking Using the Vesa Mount Holes Technical Specifications MaintenancePage Page Expand and Customize Your System