MSI Z77A-G45 manual RST Synchronization optional, Disk Port

Page 88

Intel RAID

RST Synchronization (optional)

If you are using Maximized mode as the Acceleration mode, the data on the hard disk is not always synchronized with the data in the SSD cache. In some situations, you may want to manually sync the disks for avoiding data loss.

Follow these steps to sync manually.

1.Reboot system, during the Power-On Self Test (POST) press, press <Ctrl> and <I> keys simultaneously to enter the Intel Rapid Storage Technology Option ROM.

2.Select option 5 “Acceleration Options” and press <Enter> key. The following screen appears.

 

[ ACCELERATION OPTIONS ]

 

Name

Type

Capacity

Mode

Status

DISK PORT 0

Non-RAID Disk

153.4GB

Maximized

No Sync

[ HELP ]

Press 's' to synchronize data from the cache device to

the Accelerated Disk/Volume.

Press 'r' to remove the Disk/Volume Acceleration.

WARNING: IT IS RECOMMENDED THAT YOU [ERFORM A SYNCHRONIZATION

BEFORE REMOVING ACCELERATION.

[ ↑↓] - Select

[ESC] - Previous Menu

3. Press <S> to synchronize data.

[ SYNCHRONIZATION VERIFICATION ]

SYNCHRONIZING THE DATA5. MAYExit TAKE SEVERAL MINUTES.

[ DISK / VOLUME INFORMATION ] DO NOT INTERRUPT THE PROCESS!

Are you sure you want to synchronize data to "DISK PORT 0"? (Y/N):

4. When prompted, press <Y> to confirm.

 

[ ACCELERATION OPTIONS ]

 

Name

Type

Capacity

Mode

Status

DISK PORT 0

Non-RAID Disk

153.4GB

Maximized

In Sync

5. Once synchronization is complete, the status will change to In Sync.

B-16

Image 88
Contents Z77A-G45/ Z75A-G45 series MS-7752 v1.x MainboardCopyright Notice Preface FCC-B Radio Frequency Interference Statement Bsmi EMI 聲明 Weee Waste Electrical and Electronic Equipment Statement Español Türkçe Contents Appendix a Realtek Audio Getting Started Packing Contents Optional AccessoriesAssembly Precautions ChapterMainboard Specifications Processor SupportForm Factor Connectors Quick Guide Connectors Reference Guide JUSB4Back Panel Quick Guide LANLAN CPU Central Processing Unit Introduction to the LGA 1155 CPUCPU & Cooler Installation Page Mainboard Hook Mounting Screw Holes JPWR1 ATX 24-pin Power Connector Power SupplyJPWR2 ATX 8-pin Power Connector Dual -Channel mode Population Rule MemoryInstalling Memory Modules Expansion Slots PCIe Peripheral Component Interconnect Express SlotSingle Video Card Installation Video/ Graphics CardsAMD CrossFire Multi -GPU Technology Chapter Nvidia SLI Technology Choose this item Internal Connectors SATA1~6 Sata ConnectorCPUFAN,SYSFAN1~4 Fan Power Connectors JFP1, JFP2 Front Panel Connectors JAUD1 Front Panel Audio ConnectorJUSB1~3 USB 2.0 Expansion Connectors JUSB4 USB 3.0 Expansion ConnectorJCI1 Chassis Intrusion Connector JTPM1 TPM Module connectorJTURBO1 MultiConnect Panel Connector optional JDLED3 Voice Genie Connector optionalJCOM1 Serial Port Connector FV1 Voltage Checkpoints Connector optional Jumpers JBAT1 Clear Cmos JumperLED Status Indicators Cpuphase LEDsBios Setup Entering Press DEL key to enter Setup Menu, F11 to enter Boot MenuOverview Boot device priority bar Sub-Menu OperationGeneral Help Settings System StatusAdvanced Pcie GEN3PEG Occurred Boot Save & ExitBios Setup Eist Page Chapter Page MEMORY-Z Page ECO Installing Winki BrowserUtilities Page Updating the Bios with Live Update Security Chapter Page Realtek Audio Installing the Realtek HD Audio Driver Installation for WindowsSoftware Configuration Software panel overviewAuto popup dialog Hardware Default Setting Ix a AppendBackpanel audio jacks to 8-channel speakers diagram Intel RAID Introduction Using Intel Rapid Storage Technology Option ROM Ix B AppendXXX.X GB RAID array by using the upper arrow XXXX-XXXXXXXX Press Y key to accept the volume deletion XXXX-XXXXXXXX Recovery Volume Options Installing Driver Ix B Append Degraded RAID Array Main MenuIx B Append System Acceleration optional Ix B Append RST Synchronization optional Disk Port