MSI 865GM3 manual Quick Boot, Full Screen Logo Show, First/Second/Third Boot Device

Shows the POST messages at boot.

Shows a still image (logo) on the full screen at boot.

BIOS Setup

crease number of users a platform can support, improve reaction and response time, and increase number of transaction that can be executed. Setting options: Enabled, Disabled.

MSI Reminds You...

Enabling the functionality of Hyper-Threading Technology for your computer system requires ALL of the following platform Components:

*CPU: An Intel® Pentium® 4 Processor with HT Technology;

*Chipset: An Intel® Chipset that supports HT Technology;

*BIOS: A BIOS that supports HT Technology and has it enabled; and

*OS: An operating system that supports HT Technology.

For more information on Hyper-threading Technology, go to: http://www.intel.com/info/hyperthreading

Quick Boot

The setting allows the system to skip certain tests while booting. This will decrease the time needed to boot the system. Setting options: Enabled, Disabled.

Full Screen Logo Show

This item enables you to show the company logo on the bootup screen. Set- tings are:

Disabled

Enabled

First/Second/Third Boot Device

These settings allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. Setting options:

Floppy The system will boot from floppy drive.

LS120 The system will boot from LS-120 drive. Hard Disk The system will boot from the HDD.

CDROM The system will boot from the CD-ROM.

ZIP The system will boot from ATAPI ZIP drive. USB-FDDThe system will boot from the floppy drive at USB ports.

USB-ZIPThe system will boot from the ZIP drive at USB ports. USB-CDROMThe system will boot from the CD-ROM at USB ports.

3-9