CPU Installation Procedures for Socket 478
1.Please turn off the power and unplug the power cord before installing the CPU.
2.Pull the lever sideways away from the socket. Make sure to raise the lever up to a
3.Look for the gold arrow. The gold arrow should point to- wards the lever pivot. The CPU can only fit in the cor- rect orientation.
4.If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation pro- cedures may cause permanent damages to your mainboard.
5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is prop- erly and completely embed- ded into the socket.
| Open Lever | |
Sliding | 90 degree | |
Plate | ||
|
Gold arrow
Correct CPU placement
Gold arrow
O
Incorrect CPU placement
Gold arrow
X
Press down |
|
the CPU | Close |
| Lever |