Lennox International Inc 51M37 Thermal-mechanical switch opens W1 and W2 at 93F+/−6F

Page 35

NOTE − All protection timers (except the compressor OFF timer) can be over−ridden if a heating or cooling demand is initiated or terminated using the UP, DOWN, HEAT, or COOL buttons.

Equipment Protection Override

Both the minimum compressor OFF timer and the mini- mum equipment cycle timer can be over−ridden by press- ing and holding either the HEAT or COOL button down for 4 seconds.

Over−Temperature Protection

Thermal-mechanical switch opens W1 and W2 at 93°F+/−6°F.

Filter Reminder

Settings of Off, 1, 3, 6 or 12 (months of fan run time) are available. When programmed time has elapsed, a FILTER indicator is displayed.

Maintenance Reminder

Settings of Off, 6 or 12 (months of chronological time) are available. When programmed time has elapsed, a mainte- nance indicator

Service Reminder

The SERVICE indicator is displayed only under the follow- ing conditions:

Sif the thermostat Y1 terminal has been activated with 24VAC for at least 5 minutes, AND the L terminal is shorted to the R terminal;

OR

Sif the thermostat Y1 terminal has been activated with 24VAC for at least 5 minutes, AND the L terminal is shorted to the C terminal.

Power Loss/Recovery

Thermostat memory is retained for a minimum of 24 hours during a power loss (includes retention of clock setting, program information, HOLD status, programmed temper- ature setpoint, heat/cool and fan mode settings, filter re- minder status, maintenance reminder status, and equip- ment protection timers). After 24 hours of power loss, programmed settings will be lost and replaced with default settings.

IMPORTANT

Power must be applied for at least six consecutive hours prior to a power loss in order for memory to be retained for the specified time.

LCD Backlight

Activated for 30 seconds when any button is pressed.

NOTE − During an electrical storm or similar disturbance, the backlight may activate for a few seconds. This is nor- mal and will no longer occur after the electrical disturbance has passed.

Thermostat Operating Conditions

35°F to 105°F, 5% to 90% RH

Thermostat Storage Conditions

−40°F to 185°F, 5% to 95% RH

Page 9

51M39 SERIES 5/2

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 51M37 Merit Series Home Screen Buttons, Backlight, Timers & SettingsDAY/TIME − Setting the Day and Time Thermostat ButtonsFAN Heat − Using the Heat ModeTurn Cool ON/OFF Cool − Using the Cool ModeEnabling and Disabling Cool Mode Cool Mode DisabledPM I036 FAN I036 FANFAN − Controlling the Fan Operation Settings − Filter/Maintenance RemindersRemoving/Installing Thermostat Settings − Balance PointService Indicator Thermostat ResetTechnical Specifications Default Thermostat SettingsMaintenance Reminder Smart Setback Recovery via DIP switch #6Equipment Protection Timers Over−Temperature ProtectionHeating Demands Thermostat Output TableCooling Demands 51M35 Merit Series Thermostat 51M35 Merit Series505049M 5/1/05 Turn Heat ON/OFF Heat − Using the Heat Mode Cool − Using the Cool ModeEnabling and Disabling Heat Mode Heat/Cool Mode DisabledHold − Using Temperature Hold Modes 1st press I0i4 Removing and Installing Thermostat51M35 Terminal Designations Electric Heat, Auto Fan Thermostat OutputsGas Heat, Auto Fan Gas Heat, Continuous Fan51M34 Merit Series Thermostat 51M34 Merit Series505048M 5/1/05 51M34 Series 5/2 I036 FAN OFF I0i4 51M34 Terminal Designations Heat Demand Cool Demand No Demand 51M39 Merit Series Thermostat 51M39 Merit SeriesI026 I030 Heat/Cool Mode Disabled Cooling Demand530 Auto − Using the Autochangeover Mode Copy a Programmed Day to An other Day Service Indicator Flashing Displaying Outside TemperatureCheck Outside Temperature Filter Maintenance IndicatorsDefault Program Settings Time & Temp 51M39 Terminal Designations Indoor Temperature Measurement RangeOutdoor Temperature Measurement Range Autochangeover Deadband Selection via DIP switch #7Thermal-mechanical switch opens W1 and W2 at 93F+/−6F Page −Day Programmable Thermostat 51M42 Merit Series51M42 Merit Series Thermostat 505069M 07/05 Large Heat Heating Demand FAN Auto MID Reminder Settings Display Using Fan on I026 With Electric Backup no outdoor sensor Default Program Settings − Time & TempTechnical Specifications 51M42 Terminal Designations 51M38 Merit Series Thermostat 51M38 Merit SeriesY/TIME button 51M38 Series 5/2 Hold − Using Temperature Hold Modes Repeat steps a and B for as many days as you Settings Thermostat Output Table 51M38 Terminal Designations

51M37 specifications

Lennox International Inc, a prominent player in the heating, ventilation, and air conditioning (HVAC) market, has made significant strides in innovation and technology in recent years. Among its notable offerings is the Lennox 51M37, a well-engineered component designed to enhance HVAC efficiency and reliability.

The 51M37 is primarily known for its advanced motor technology, incorporating ECM (Electronically Commutated Motor) design, which significantly reduces energy consumption compared to traditional motor systems. This motor type is key to Lennox's commitment to sustainability, as it not only maintains optimal performance but also minimizes the carbon footprint associated with residential and commercial heating and cooling tasks.

A standout feature of the 51M37 is its intelligent control system, which allows for more precise management of airflow and temperature. This technology can adapt to specific environmental conditions and consumption patterns, optimizing performance and providing substantial cost savings on energy bills. The integration of smart technology aligns with modern demands for energy efficiency and control, making the 51M37 a vital component in achieving higher energy ratings for HVAC systems.

In terms of compatibility, the 51M37 is engineered to work seamlessly with a variety of Lennox heating and cooling units, ensuring versatility for both new installations and retrofits. This compatibility enhances system integration, resulting in improved overall performance.

The construction of the 51M37 emphasizes durability and reliability, featuring high-quality materials that withstand the challenges of constant operation. Its robust design is perfect for diverse environments, ensuring that it functions reliably in both residential settings and commercial applications.

Another characteristic worth noting is the user-friendly installation process, allowing HVAC technicians to install the 51M37 with relative ease. This not only reduces labor costs but also ensures that the system can commence operation quickly without extensive downtime.

Overall, Lennox International's 51M37 embodies innovation, efficiency, and reliability in HVAC technology. With its advanced ECM motor, intelligent controls, and durable construction, it stands as a prime example of how modern HVAC solutions can lead to enhanced performance and energy savings. As the industry continues to evolve, products like the 51M37 will play a critical role in shaping the future of heating and cooling, aligning with sustainability goals and meeting the needs of consumers.
Top Page Image Contents