Panasonic SC-BT228, VQT2T10 warranty Display, TV / Device Connection

Digital Audio Output

Press [OK] to show the following settings.

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

Select the audio signal to output.

≥Select “PCM”, when the connected equipment cannot decode the respective audio format.

≥Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 20)

≥If “Off” is selected, the unit outputs the primary audio only.

Digital Audio Input

Select whether to receive the digital sound as PCM or the original sound format.

Select “On” if the sound is cut off intermittently.

Downmix

Select the downmix system to enjoy multi-channel or 2-channel sound.

≥Select "Surround encoded" to enjoy the surround sound.

≥There is no downmix effect on the bitstream audio signal.

≥The audio will be output in “Stereo” in the following cases.

–AVCHD playback

–Playback of secondary audio (including the button click sound).

High Clarity Sound

When connected to TV via HDMI AV OUT terminal for outputting image, it produces clearer sound because the analog video circuit (via VIDEO OUT terminal) can be stopped.

≥Set to “Enable” and then set “High Clarity Sound” on the playback menu to “On”. (> 28)

Audio Delay

Mis-sync between the video and audio is corrected by delaying the audio output.

Speaker

Refer to page 31

Display

Status Messages

Choose whether to show status messages automatically.

On-screen Language

Choose the language for these menus and on-screen messages.

Screen Saver Function

This is to prevent burn-in on the screen.

≥When this is set to “On”:

If there is no operation for 5 minutes or more, the displayed screen switches to the other states automatically.

FL Display

Changes the brightness of the unit’s display.

≥If “Auto” is selected, the display is dimmed but brightens when you perform some operations.

VQT2T10

FL Control (Vol 0)

≥If “On” is selected, the unit’s display will turn off when the volume is adjusted to “0”.

License

Information about the software used by this unit is displayed.

TV / Device Connection

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

4:3	The sides are cut off so the
	picture fills the screen.

When playing BD-Video, video is output as “4:3 Letterbox”.

4:3 Letterbox Black bands appear at the top and bottom of the picture.

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9	Video is displayed as a 4:3 ratio image in the
	center of the screen.

HDMI Connection

Press [OK] to show the following settings.

HDMI Resolution

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

≥If “Auto” is selected, automatically selects the output resolution best suited to the connected television.

≥To enjoy high definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible.

24p Output

When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

≥When playing DVD-Video, set to “On” and then also set “24p” in “Video” (> 28) to “On”.

≥When BD-Video images other than 24p are played, images are output at 60p.

HDMI Color Mode

This setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable.

HDMI Audio Output

This setting selects whether or not to output audio from HDMI.Audio will be output through the system's speakers when "Off" is selected.

30