Panasonic VQT2T10, SC-BT228 warranty Messages, On the television, On the unit’s display

Page 35

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

On the television

Cannot play.

≥You inserted an incompatible disc. (Discs recorded in PAL video, etc.)

Cannot display on this unit.

≥You tried to play a non-compatible image.

No disc is inserted.

≥The disc may be upside down.

$This operation is not available.

≥Some operations are unsupported by the unit. For example; jBD-Video: During playback, reverse slow-motion or

reverse frame-by-frame is not possible.

No Video

≥Depending on the connected iPod, video menu may not be available on the TV. Select “ALL” on the unit’s display and operate video playback from your iPod menu. (> 26)

On the unit’s display

F99

≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to standby for 3 seconds. Now press [POWER Í/I] on the main unit again to turn the unit on.

U59

≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit. Do not block the ventilation hole on the rear and side of the unit.

U72

U73

≥The HDMI connection acts unusually. jTurn the unit and TV off.

jDisconnect the HDMI cable between the player and the TV.

HDMI ONLY

≥Some BD-Video discs can only be output with HDMI.

No PLAY

≥There is a viewing restriction on a BD-Video or DVD-Video. (> 29)

No READ

≥The media is dirty or badly scratched. The unit cannot play.

PLEASE WAIT

≥The unit is carrying out an internal process.This is not a malfunction. You cannot operate the unit while “PLEASE WAIT” is displayed.

SET

(“ ” stands for a number.)

≥The remote control and main unit are using different codes. Change the code on the remote control. (> 16)

Hor F

(“ ” stands for a number.)

≥Check and correct the speaker cable connections.

≥There is something unusual.

≥Check the unit using the troubleshooting guide. If the service

number does not disappear, do the following.

1Disconnect the plug from the household AC outlet, wait a few seconds, then reconnect it.

2Press [POWER Í/I] to turn the power on.

If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

IPOD OVER CURRENT ERROR

≥The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again.

NOT CONDITIONAL

≥The requested operation cannot be conducted.

Reference

VQT2T10

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents If you have any questions contact 1-800-211-PANA7262 Warranty can be found onUser memo FCC NoteSC-BT228 Inside of product This symbol is only valid in the European UnionTable of contents Accessory Control reference guide Remote controlIf the front cover comes off Main unit FrontMain unit Rear Playable discs/Cards BD-Video Discs that cannot be played in this unitRegion management information FinalizeUnit and media care Using the remote control  Setup examplePreparing the speakers PositioningConnection to a TV ConnectionsSpeaker cable connection Video cable included Audio cable not included Basic connectionConnection for the better audio Connection for the best picture and audioRadio antenna connection Using an indoor antennaUsing an outdoor antenna Necessary SettingsEasy setup assists you to make necessary settings AC power supply cord connectionEasy setup Press OK several times to finish the Easy setupInserting or removing a media Reprogramming the remote controlTo switch sources Press 3, 4 to select Setup and press OKButton Source Selecting the source by the remote controlStart menu Press Start Press 3, 4 to select the item and press OKChanging the sound modes Adjusting speaker level during playEnjoying surround sound effects Press Surround several times to select the effectPlaying video contents Playing picture-in-picture Playing still picturesUseful functions Enjoying Bonusview BD-VideoPlaying music Listening to the Radio Presetting stations automaticallyPresetting stations manually Sound modes Making settings for digital audio inputEnjoying TV with unit’s speakers Surround sound effectsSetting the audio link with the STB Setting the audio linkWhat is Viera Link Hdavi Control? Setting the audio link with the TVEasy control only with Viera remote control Connect the iPod not included firmly Using the iPodIPod Connection Push # to open the iPod lidPress BD/SD to select BD/DVD Press Display Press 3, 4 to select the setting and press OKOther methods of playback Basic controlsPlay DiscVideo AudioAudio Language Still Mode paused videoDVD-Video Ratings BD-Video RatingsTV / Device Connection DisplayOthers Speaker settingsPress 3, 4 to select the setting and press Attaching to a wall Speaker installation optionAdjusting speaker level Displays Troubleshooting guidePower General operationOther difficulties with playback SoundIPod operation RadioOn the unit’s display MessagesOn the television MPEG2 Structure of folders that can be played in this unitMP3 JpegAudio attribute Language code listDisplay languages list Video attributeContact Information cdrequest@am-linux.jp DTS-HD GlossaryAvchd BD-JSpecifications Laser power Signal systemOutput connector Laser SpecificationAs of November Limited WarrantyLimited Warranty Limits And Exclusions One Panasonic Way, Secaucus, New JerseyReference Index

VQT2T10, SC-BT228 specifications

The Panasonic SC-BT228, also known as VQT2T10, is a home theater system that combines superior audio performance with sleek design, making it an ideal choice for audiophiles and casual listeners alike. This compact system is engineered to deliver a true cinematic experience at home, featuring a range of cutting-edge technologies that enhance sound quality and user experience.

One of the standout features of the SC-BT228 is its built-in Blu-ray Disc player, which supports high-definition video playback and offers compatibility with a wide array of disc formats. This allows users to enjoy their favorite movies in stunning clarity. Additionally, the system supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that sound reproduction is rich and immersive.

Another key characteristic of the SC-BT228 is its unique speaker configuration. It includes four compact satellite speakers and a powerful subwoofer, delivering a 5.1 channel surround sound experience. The speakers are designed to produce clear dialogue and dynamic effects, while the subwoofer adds depth to movies and music, creating a balanced audio output that fills the room.

The SC-BT228 is equipped with Panasonic's innovative technologies, such as Viera Link, which allows for seamless connectivity with other Panasonic devices. Users can easily control multiple devices with a single remote, simplifying the home theater experience. The system also features a USB port, enabling users to play music and video files directly from USB flash drives, providing more flexibility in entertainment options.

Moreover, the VQT2T10 comes with an easy-to-navigate interface, making setup and operation straightforward, even for those who may not be tech-savvy. The device offers several sound modes tailored for various types of content, including movies, music, and games, allowing users to optimize their listening experience based on their preferences.

In terms of design, the SC-BT228 boasts a modern and elegant appearance, making it a stylish addition to any home decor. The compact size of the speakers ensures they can be placed in various environments without overwhelming the space.

In summary, the Panasonic SC-BT228, VQT2T10, is a powerful home theater system that offers a diverse range of features and technologies aimed at enhancing the user experience. With its Blu-ray playback, 5.1 channel surround sound, seamless connectivity options, and user-friendly design, this system stands out as a top choice for anyone looking to elevate their home entertainment setup.
Top Page Image Contents