Lorex Security Camera DXR109 manual System Set Up, Selecting the Audio Input Channel

Page 11

System Set Up

The system menu is used to configure the system level options of the DXR109…

To access the System features, press MENU followed by the 4 -digit password. Use the ? / ? to scroll to the ‘System’ option and press ENTER.

(SYSTEM)
Audio Input:	1
Int Audible Alarm:	ON
Ext Audible Alarm:	ON
Motion Audible Alarm:	ON
Alarm Duration:	10 SEC
Dwell Time:	02 SEC
Message Latch:	NO
Title Display:	ON
Time Display:	Y/M/D
2003-JAN-02 (THU)	17:37:09
New Password:	XXXX
Clear HDD:	NO
System Reset:	NO
Remote Mode:	RS-232
Baud Rate:	9600
Remote ID:	000

Using the ? / ? buttons, scroll to the desired option and press ENTER to select it.

Selecting the Audio Input Channel

This Feature is used to select the audio channel to record. To set this Audio Input Channel:

1.On the System screen, press ? / ? to select Audio Input, then press ENTER.

2.Press ? / ? to select the desired time audio channel (1-4)

3.Press MENU to confirm your change.

4.Press ? / ? to move to another field on the System screen or press MENU to exit.

Setting the Internal Audible Alarm Buzzer

To enable or disable the internal audible alarm buzzer: If enabled, the buzzer will sound when the external alarm input is activated.

1.On the System screen, press ? / ? to select Internal audible alarm buzzer, then press ENTER.

2.Press ? / ? to enable or disable the internal audible alarm buzzer. Options are:

ON = Buzzer is on. When the DVR detects an alarm, the system sounds the internal buzzer to alert the user. OFF = Buzzer is off.

3.Press MENU to confirm your change.

4.Press ? / ? to move to another field on the System screen or press MENU to exit.

Setting the External Audible Alarm device

To enable or disable the External Audible Alarm Device:

1.On the System screen, press ? / ? to select External Audible Alarm Device, then press ENTER.

2.Press ? / ? to enable or disable the External Audible Alarm Device. Options are:

ON = External Device is on. When the DVR detects an alarm, the system triggers the external audible alarm. OFF = External Device is Off

3.Press MENU to confirm your change.

4.Press ? / ? to move to another field on the System screen or press MENU to exit.

10

Image 11

Contents Channel Digital Video Recorder DXR109 L3R 4C1 Canada Table of Contents Important Safety Instructions Introduction FeaturesSystem Contents Front Panel Controls Camera Select LED IndicatorsPause / Up SlowBack Panel Connections Accessing the Main Menu Selecting the Audio Input Channel System Set UpSetting the Internal Audible Alarm Buzzer Setting the External Audible Alarm deviceSetting the Message Latch feature Setting the Motion Audible Alarm featureSetting the Alarm Duration Setting the Dwell TimeClearing the Hard Drive Data Changing the System PasswordResetting System to Factory Defaults Jan-01 MonTimer Recording Setup Remote Protocol SetupNtsc 15A, 15, 8, 4, 2 PAL 12A, 12, 6, 3, 2 BEST, HIGH, NORMAL, BasicRecord Quality Setup Record SettingsHDD Overwrite Setup Record IPS SetupDwell Camera Channel SetupAlarm Polarity TitleMotion Detection Motion Detection Setup2MOTION Detection Setup Line Motion Detection Setup 1~9HDD Warning HDD ErrorSystem Error Power RestoreOperation Video Search Alarm ListPicture in Picture PIP ZoomStop Slow reverseImage Jog PauseProblem Solution TroubleshootingYY/NN/DD, DD/MM/YY, MM/DD/YY, OFF Technical SpecificationsRemove the Cartridge Casing from the DXR109 Appendix 1 Installing the HDDCartridge Casing Lock the Cartridge Secure the HDD in the cartridge casingSlide the top Cover over the Cartridge Casing Appendix 2 Connection Diagram to Cameras and Monitor Appendix 3 Pin Configurations Pin References for RS-232 / Alarm Block Appendix 4 Rack Mount Installation Ntsc System Appendix 5 Recording Times in HoursFunction Code Ascii Appendix 6 RS232 Remote ProtocolAppendix 7 Compatible HDD Brands Manufacturer Model Capacity RotationLorex Product Limited Warranty Limited WarrantyCare & Maintenance