Remote Protocol Setup
This feature is used to set the basic
Pressing ENTER after scrolling to the Remote option will bring up the following menu options:
Remote mode: Selects whether to use an
Baud rate: Selects the baud rate (bps) to be used for the connection.
The available settings are: 115200, 57600, 19200, 9600, 3600, 2400, 1200.
ID:Selects a numerical number representing the DVR being controlled if multiple units are being used.
The available setting are: 000 – 255
The remote connection on the DVR uses 8 data bits, 1 start bit, and 1 stop bit, no Parity.
Below is an example of the data stream with the control codes shown.
(Menu) Search Timer Record Alarm
?Remote System Event
ACT – OxFF | OxCO | ID | FUNCTION | STOP – Ox7F |
Please refer to Appendix 3 for information on the Pin connections and command protocols that would be used in this application.
Timer Recording Setup
On the Main menu, selecting the Timer option will allow you to set daily schedules in which you would like the DVR to automatically record.
Pressing ENTER after scrolling to the Timer option will bring up the following menu options:
Timer
| (Timer) |
| |
Day | Start | End | IPS |
Daily | 01:00 | 02:00 | Off |
SUN | 12:00 | 13:00 | Off |
MON | 08:00 | 09:00 | Off |
MO~FR | 00:00 | 01:00 | Off |
SA~SU | 20:00 | 21:00 | Off |
15:00 | 16:00 | Off | |
Timer Enable: | No |
| |
|
|
|
|
1.Press ? / ? to select the day(s) to record on, the available options are…
Daily: Everyday
SUN: Sunday
MON: Monday
TUE: Tuesday
WED: Wednesday
THU: Thursday
FRI: Friday
SAT: Saturday
OFF: Not activated
(Menu) Search
?Timer Record Alarm
Remote
System
Event
13