Lorex Security Camera DXR109 manual System Contents

Page 6

System Contents

The DXR109 box should include the items listed below. Please take a moment to verify that no items are missing from the package.

	DXR109 Digital Video Recorder	Hard Disk Drive in Cartridge
	DXR109 Digital Video Recorder	(not included in all models)
		(not included in all models)

	2 Keys for
Installation / User Manual	Hard Drive Cartridge	Power Adapter and Cord

NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY ARE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE.

Getting Started

If the purchased DVR model did not contain a hard disk drive, please refer to Appendix #1 for HDD installation instructions.

1.Connect video sources and monitor(s) following the configuration example shown in Appendix # 2.

2.Connect the AC Power Cord to the Power Adapter and plug into an electrical outlet. A Red LED indicator light will be ON to indicate that the DVR is in Standby mode.

3.Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. Note: the system takes approximately 5 to 15 seconds to power up. During the power-up, you will see the following messages: “HDD Detecting”, followed by “Master HDD Connected”.

Once connected, the POWER LED will change to green, and the red indicator lights will be ON next to the Alarm and Timer buttons. (The alarm and Timer LED’s simply indicate that these features are enabled)

NOTE: IF YOU GET THE MESSAGE “HDD NOT FOUND”, PLEASE SEE APPENDIX #1 AS THE HDD IS LIKELY NOT INSTALLED CORRECTLY.

5

Image 6

Contents Channel Digital Video Recorder DXR109 L3R 4C1 Canada Table of Contents Important Safety Instructions Features IntroductionSystem Contents Front Panel Controls Slow LED IndicatorsPause / Up Camera SelectBack Panel Connections Accessing the Main Menu Setting the External Audible Alarm device System Set UpSetting the Internal Audible Alarm Buzzer Selecting the Audio Input ChannelSetting the Dwell Time Setting the Motion Audible Alarm featureSetting the Alarm Duration Setting the Message Latch featureJan-01 Mon Changing the System PasswordResetting System to Factory Defaults Clearing the Hard Drive DataRemote Protocol Setup Timer Recording SetupBEST, HIGH, NORMAL, Basic Ntsc 15A, 15, 8, 4, 2 PAL 12A, 12, 6, 3, 2Record IPS Setup Record SettingsHDD Overwrite Setup Record Quality SetupTitle Camera Channel SetupAlarm Polarity DwellMotion Detection Setup Motion DetectionMotion Detection Setup 1~9 2MOTION Detection Setup LinePower Restore HDD ErrorSystem Error HDD WarningOperation Zoom Alarm ListPicture in Picture PIP Video SearchPause Slow reverseImage Jog StopTroubleshooting Problem SolutionTechnical Specifications YY/NN/DD, DD/MM/YY, MM/DD/YY, OFFAppendix 1 Installing the HDD Cartridge CasingRemove the Cartridge Casing from the DXR109 Secure the HDD in the cartridge casing Slide the top Cover over the Cartridge CasingLock the Cartridge Appendix 2 Connection Diagram to Cameras and Monitor Appendix 3 Pin Configurations Pin References for RS-232 / Alarm Block Appendix 4 Rack Mount Installation Appendix 5 Recording Times in Hours Ntsc SystemAppendix 6 RS232 Remote Protocol Function Code AsciiManufacturer Model Capacity Rotation Appendix 7 Compatible HDD BrandsLimited Warranty Lorex Product Limited WarrantyCare & Maintenance