TROUBLESHOOTING
IMPORTANT As soon as your vacuum cleaner starts to malfunction, and before performing any checks stop the appliance by pressing the Start/Stop switch.
If your vacuum cleaner does not start
•The appliance is not
GB If there is no suction
•An accessory or the tube is clogged. Unclog the accessory tube or flexible hose.
•The cover was not closed properly: check that the bag is properly installed and reclose the cover.
If the suction of your vacuum cleaner has dropped, it makes a noise and whistles
•An accessory or the flexible hose is partially clogged. Unclog the accessory tube or flexible hose.
•The bag is full or clogged with fine dust. Fit a new bag or empty the fabric dust bag.
•The filter is full: change the HEPA* filter cassette (ref. XC000801) and fit it back into position (see page 13 paragraph 2).
•If the manual suction regulator on the grip is open, close the manual suction regulator*.
If the bag full indicator remains red
• The bag is full. Fit a new one.
If the floor nozzle is hard to move around
•Set vacuum power with the
If the power cable does not rewind completely
•The power cord is slow in
If problems persist, take your vacuum cleaner to the nearest Tefal approved Service Centre (see list of approved
service centres) or contact the Tefal Customer Service (see contact details on last page).
Warranty
•This product has been designed for domestic use only. Any professional use, innapropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
•Read the instructions for use carefully before using your appliance for the first time: any use which does not conform to these instructions will absolve Tefal from any liability.
*Depending on model: this is either equipment specific to certain models or available as an optional accessory.
14
741274_xtrempower02.indd 14 | 24/09/08 16:29:34 |