Plantronics CS510, CS520 manual Desk Phone plus HL10 Lifter sold separately, Use

Page 11

Desk Phone plus HL10 Lifter (sold separately)

NOTE First follow the steps above for Desk Phone (Standard).

1Firmly press the handset lifter power cord into the handset lifter jack.

USE

2While wearing your headset, slide the handset lifter arm under the handset until the lifter base touches the side of the phone.

3Slide the lifter up to where it nearly touches the handset earpiece.

4Press the call control button on your headset to activate the lifter.

5If you hear a dial tone the lifter is set correctly and needs no adjustment.

6Remove the protective strips from the 3 mounting tapes on the underside of the lifter.

7Gently place the lifter on the desk phone in the pre-determined position.

8Press firmly to adhere.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
CS510/CS520 Contents Welcome What’s in the Box Base overview Base and Headset BasicsAccessories Adjust the Headband Headset Set UpCharge the Headset Connect the PowerConnect Your Desk Phone Desk Phone standard Connect and Configure Your Desk PhoneCheck Configuration and Make a Test Call USE Desk Phone plus HL10 Lifter sold separatelyAdditional Parts if required If You Do Not Hear a Dial ToneDesk Phone plus EHS Cable Position Your Base Talk Time Your HeadsetHeadset Controls Muting Your Headset During a Call BatteryAdjusting Your Headset Volume Low Battery WarningYour Base Base Phone Button and Switches Subscription ButtonAuto Answer Switch Wideband/Narrowband Audio SwitchAnswer an Incoming Call Conference Up to Three Additional HeadsetsDaily Use Place an Outgoing CallDesk Phone TroubleshootingHeadset Need More HELP?
Related manuals
Manual 21 pages 53.12 Kb